B88069X3020C253

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Gas Discharge Tube (GDT) Arresters are devices used to protect electrical equipment from transients, surge currents, and voltage spikes in outdoor applications. The GDT works by providing a conducting path for the energy from the transient to be safely redirected to ground. The GDT consists of two electrodes inside a ceramic cylinder filled with a special gas or vacuum. When the voltage between the electrodes exceeds a certain threshold level, the gas or vacuum ionizes, providing a conducting path to ground.

The B88069X3020C253 is a GDT designed to protect sensitive electronic equipment from outdoor electrical transients and surge currents. It is designed to operate in either AC or DC applications. This GDT has a voltage rating of 2800Vrms/minute in AC and 2500Vrms/minute in DC. It also has an insulation resistance of 1000MΩ when tested in a climatic chamber.

The working principle of the B88069X3020C253 GDT is based on the phenomenon that when the voltage between the electrodes exceeds the lightning impulse voltage, the gas or vacuum on the two electrodes is ionized and turned into plasma. This plasma will form a conducting path between the two electrodes and redirect the surge current from the equipment to ground. This in turn prevents damage to the equipment from the surge current or lightning strike.

The B88069X3020C253 is mainly used to protect power grids, communications equipment, electronic equipment, and control systems in outdoor applications. It can also be used in a wide range of applications, including power supplies, power electronic circuits, and process control equipment. The GDT is also commonly used in high frequency applications due to its low capacitance and high reliability.

The B88069X3020C253 GDT is designed to provide protection from surge current, lightning, and transients. It can be used in both AC and DC applications, and has a voltage rating of 2800Vrms/minute in AC and 2500Vrms/minute in DC, as well as an insulation resistance of 1000MΩ when tested in a climatic chamber. The GDT is designed to provide protection to sensitive equipment in outdoor applications, and can be used in a wide range of applications, including power supplies, power electronic circuits, and process control equipment.

The specific data is subject to PDF, and the above content is for reference