BAS7006E6433HTMA1

Series:	--
Packaging:	Tape & Reel (TR)
Part Status:	Active
Diode Configuration:	1 Pair Common Anode
Diode Type:	Schottky
Voltage - DC Reverse (Vr) (Max):	70V
Current - Average Rectified (Io) (per Diode):	70mA (DC)
Voltage - Forward (Vf) (Max) @ If:	1V @ 15mA
Speed:	Small Signal =
Reverse Recovery Time (trr):	100ps
Current - Reverse Leakage @ Vr:	100nA @ 50V
Operating Temperature - Junction:	150°C (Max)
Mounting Type:	Surface Mount
Package / Case:	TO-236-3, SC-59, SOT-23-3
Supplier Device Package:	SOT-23-3
Base Part Number:	BAS70-06

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

BAS7006E6433HTMA1 Diodes - Rectifiers - Arrays

The BAS7006E6433HTMA1 is a high speed low voltage diode rectifier array designed for power supply design, voltage regulation, and AC ripple suppression in a range of high-end applications. The device is capable of operating with reverse voltages up to 40V, with a peak forward current up to 6A and a single pulse non-repetitive peak pulse current up to 10A. These characteristics make the chip ideal for high voltage power supplies and renewable energy applications such as solar inverters and electric vehicle chargers.The chip is comprised of four low voltage diodes on a single chip. Each diode includes a built-in substrate diode for reverse protection and overvoltage protection against transient electrical surges. The high conductance of the chip allows for fast switching with low losses in power conversion applications.The working principle of the BAS7006E6433HTMA1 is based on the process of rectification. Rectification can be defined as the process of converting alternating current (AC) to direct current (DC). This process is achieved by introducing a rectifying component (in this case, the BAS7006E6433HTMA1 chip) into the power circuit. The rectifying component allows the current to flow in one direction only, so any AC component is blocked or rectified.The diode rectifier array in the BAS7006E6433HTMA1 chip is composed of four diodes connected in an alternating pattern, consisting of two anodes (positive terminals) and two cathodes (negative terminals). As the majority of general-purpose circuits use full-wave rectification, the BAS7006E6433HTMA1 is designed to meet this requirement, using two pairs of diodes connected in series and alternating mode.The rectification process works as follows: in a full-wave rectification circuit, when the cycles of the AC voltage trains are applied to the primary of the transformer, the output voltage of the transformer is given to the rectifier. This consists of four diodes arranged in the BAS7006E6433HTMA1 chip to form a full-wave rectifying circuit.When the voltage is positive at the anode of the diode, the diode conducts and current flows into the load. However, when the AC voltage is negative at the cathode, the diode does not conduct and the current does not flow. Therefore, the output voltage across the load will only be positive and the AC component of the input will be blocked, leading to DC current.The BAS7006E6433HTMA1 chip with four diodes is able to provide high speed switching, low losses in power conversion applications, reverse voltage protection, along with a single pulse non-repetitive peak pulse current up to 10A and peak forward current up to 6A. This makes it an ideal choice for a variety of high voltage power supplies, tracking and regulation circuits, solar inverters, uninterruptible power supplies, and electric vehicle chargers. The chip is generally easy to incorporate in the target system due to its small package size and its overall high performance. This leads to more efficient and reliable electronic systems, with minimal power losses and a high reliability rating. The BAS7006E6433HTMA1 diode rectifier array is an efficient and reliable technology that is suitable for a variety of applications. It has a peak forward current of 6A and a single pulse non-repetitive peak pulse current of 10A, making it ideal for power supplies, voltage regulation and AC ripple suppression in high-end applications such as solar inverters and electric vehicle chargers. The overall design of the chip allows for fast switching, low power losses and reverse voltage protection. As such, the chip is the perfect choice for efficient and reliable power management solutions.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description