BD65496MUV-E2

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

PMIC, or Power Management Integrated Circuits, are integrated circuits utilized to control power voltages or currents by regulating or switching its output. Building upon that idea, PMIC specifically Motor Drivers, Controllers seek to control electric motors for a wide array of different applications in automotive, industrial and consumer electronics. Such a device like the BD65496MUV-E2 can be one example of such a PMIC for motor drivers and controllers.The BD65496MUV-E2 is a non-insulated, full-bridge driver IC specifically designed for automotive applications. It features a wide 8V to 20V operating voltage range and provides up to 3A output current. The BD65496MUV-E2 also has thermal protection and over-current protection while boasting high frequency switching of up to 500kHz. With its high frequency operation, switching can be accomplished with much higher efficiency than similar motor drivers at lower frequencies.In terms of its application fields, the BD65496MUV-E2 is suitable for driving brushless DC motors (BLDC), step motors, and DC motors. Additionally, it can be used to drive only one of a bridge motor, two bridge motor, or four bridge motor. As a result, the BD65496MUV-E2 fits a wide range of applications, such as for use in automated machines, control for window regulator motors, and control for fuel pumps.As for the BD65496MUV-E2’s working principle, the device is a full-bridge driver IC that operates to drive a 4-phase stepper from an external power source, like an H-bridge consisting of four outputs which correspond to four switching elements. Therefore, each of the four outputs source current when active and sink current otherwise. This allows for the generation of current flows for the motor.At the heart of the H-bridge lies the BD65496MUV-E2’s “skeleton” circuit. This is basically where the control signals toSwitch, namelyIN1, IN2, IN3 and IN4, are sent to the device and cross-couples them. From there, the four outputs, Pout1, Nout1 Pout2, and Nout2 become activated according to the signal sent in. Then, through further manipulation of the signals, the four outputs can be operated to control the electrical motor.The BD65496MUV-E2 is an all-in-one motor driver, perfectly geared for the applications listed above. It can control steppers with high efficiency and can handle a wide voltage range. Additionally, with its thermal and over-current protections, the device adds an element of safety during prolonged operations. Its ability to provide precisely controlled current rises and falls allows for high frequency switching operations without compromise when it comes to robustness or efficiency.As a result, the BD65496MUV-E2 is truly a mighty machine for controlling motors, as it has secured itself a spot in the PMIC Motor Drivers, Controllers market. Its operating range and efficiency, coupled with its safety features make it ideal for a wide range of motor control applications. From automated machines to window regulators, the BD65496MUV-E2 is the perfect fit, boasting an impressive performance in all aspects.

The specific data is subject to PDF, and the above content is for reference