BTA10-400BRG

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Thyristors are widely used within electrical engineering, electric power systems, electronics, etc. They are three-terminal devices that switch current faster than an electronic resistor and they constitute an important application field for TRIACs. The BTA10-400BRG is a type of TRIAC, which stands for TRIode for Alternating Current, and it is employed in the control and regulation of currents in several applications.

The BTA10-400BRG is a high-voltage, fast-response, higher power TRIAC which provides rapid switching under high surge conditions. Typically, it is used with SCR controllers to switch on and off current efficiently to provide extended dynamic performance for higher power applications. This TRIAC is able to switch on in zero current up to 600V and provides a maximum surge current of 10A. Its fast switching time allows high frequency control in various industrial applications.

The BTA10-400BRG has several characteristics that make it a reliable device for high-power applications, such as high surge capability, robust gate and strong insulation. Its high surge capability enables the TRIAC to evenly switch on the current over the entire range, increasing the efficiency of the circuit. Furthermore, its robust gate allows for low switching losses and stable operation even when operating under difficult conditions.

The working principle of the BTA10-400BRG is based on the operation of the Gate Turn-Off (GTO) thyristor. The GTO thyristor is triggered by a small gate current that is generated by an external circuit. When this gate current is applied, the GTO thyristor begins to conduct current, allowing the load to be switched on. Furthermore, when the gate current is removed, the GTO thyristor will quickly switch off the current, allowing the load to be isolated from the circuit.

The BTA10-400BRG is primarily employed in motor control systems to control the speed or torque of the motor. In a motor control circuit, the BTA10-400BRG is connected in series with a GTO thyristor, which is used to switch on the current when the motor is running at a desired speed. Furthermore, the BTA10-400BRG can be used in AC power supplies to provide a regulated output voltage. This can be achieved by connecting the BTA10-400BRG in series with a rectifier and a filter capacitor to produce a steady voltage output.

In conclusion, the BTA10-400BRG is a high-power TRIAC that is used in several applications, primarily motor control and AC power supplies. Its fast switching ability allows for high frequency control and extended dynamic operation, allowing it to be used in high power applications. Its robust gate and insulation are designed for reliable operation under difficult conditions.

The specific data is subject to PDF, and the above content is for reference