BTA10-600CRG

Series:	--
Packaging:	Tube
Part Status:	Active
Triac Type:	Standard
Voltage - Off State:	600V
Current - On State (It (RMS)) (Max):	10A
Voltage - Gate Trigger (Vgt) (Max):	1.3V
Current - Non Rep. Surge 50, 60Hz (Itsm):	100A, 105A
Current - Gate Trigger (Igt) (Max):	25mA
Current - Hold (Ih) (Max):	25mA
Configuration:	Single
Operating Temperature:	-40°C ~ 125°C (TJ)
Mounting Type:	Through Hole
Package / Case:	TO-220-3
Supplier Device Package:	TO-220AB
Base Part Number:	BTA10

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Thyristors - TRIACs: BTA10-600CRG application field and working principle

Thyristors are semiconductor devices that can be used to control electrical current and to regulate voltage in power electronics applications. Thyristors are especially beneficial due to their ability to be rapidly turned on and off, allowing precise control of electric power with minimal energy loss. TRIACs (triode for alternating current) are a class of thyristors that allow current to flow through them in both directions, making them highly versatile devices. This article looks at how BTA10-600CRG TRIACs can be used to regulate voltage and current, as well as their unique construction and working principle.BTA10-600CRG TRIACs are three-terminal, four-layer devices that can be used to switch and control voltages up to 600 VAC. Their three terminals are named the Gate, Anode, and Cathode. The Gate terminal is the control terminal that allows the TRIAC to be rapidly turned on and off. Applying a small voltage to the Gate terminal allows electric current to flow through the device in either direction, while removing the voltage deactivates the device. The Anode and Cathode terminals are the power terminals that are connected to the power source and load, respectively. The BTA10-600CRG has an on-state resistance of typically 0.3 ohms, making it effective in applications such as motors, solenoids, heaters, and other high-power circuits.The BTA10-600CRG TRIAC works through a process called avalanching, which utilises its four layers. These four layers are a layer of P-type semiconductor material sandwiched between two N-type semiconductor layers. Anode and Cathode terminals are connected to these P-N layers. As current flows through the device, the Gate terminal is charged, creating a voltage across the Anode-to-Gate and Gate-to-Cathode junctions. When the voltage across these junctions reaches a certain threshold, the electrons in the Gate-to-Cathode junction break through and cause the P-N layer to become conducting. This causes the TRIAC to enter its ‘on’ state and current to flow through the device in either direction. This process is essentially reversed when the Gate terminal is discharged, which causes the P-N layer to weaken and the current flow to stop. This makes the BTA10-600CRG a fast-switching device that is ideal for applications that require precise control of electric power. The versatility of the BTA10-600CRG makes it an ideal device for a variety of applications. One common application is motor speed control. By connecting the Gate terminal to an external control circuit, the motor speed can be precisely adjusted. The BTA10-600CRG can also be used as a sensor for applications such as temperature control, pressure control, and flow control. Additionally, it can be used in AC power supplies and resistive heating. The BTA10-600CRG’s ability to rapidly switch electric current makes it essential for applications requiring precise control with minimal energy loss. Its four-layer construction and innovative working principle make it one of the most versatile and reliable devices available. The BTA10-600CRG is an invaluable part of power electronics and its applications are vast and varied.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description