BTA202X-800E/L01,1

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The BTA202X-800E/L01 belongs to a category of semiconductor devices called TRIACs, which stands for Triode for Alternate Current, and are a type of Thyristors. TRIACs are used to control and power the amount of current that flows in a given circuit. This device is used in applications where the current needs to be modulated or adjusted to different levels based on the requirements of the system.

This particular device is designed to switch ac power control in low voltage applications. It is capable of blocking anode-cathode voltages as high as 800 volts and can carry a maximum current of 2A. The BTA202X-800E/L01 also incorporates a zero crossing detector which enables it to be used in applications requiring phase-angle control.

The operation of the BTA202X-800E/L01 is based on the basic principle of a thyristor, which is a three-terminal semiconductor device with two current carrying electrodes, a gate electrode, and a control electrode. Applying a forward bias voltage to the gate of the device triggers a transfer of electrons from the anode to the cathode, thus allowing current to flow from the source to the load. The device remains conducting until the reverse bias voltage applied to the gate is reduced to zero. The device can also be turned off by introducing a negative gate voltage.

The BTA202X-800E/L01 is suitable for controlling ac power in a variety of applications including motor control, light dimming, and heater regulation just to name a few. Typically, the device is connected to a power supply or a motor and is turned on and off at a given rate to regulate the amount of power supplied or the speed of a motor.

The device can also be used in conjunction with current sensors, such as current transformers, to provide overcurrent protection. In this application, the device is used to monitor current levels and cut off power supply when the desired current level is exceeded. This helps to protect the equipment and the users of the system.

The BTA202X-800E/L01 is designed to provide efficient and reliable power control and protection in a range of ac power applications. Its Triac design and zero crossing detector enable it to switch ac power with low losses and noise, thus prolonging the life of the system.

The specific data is subject to PDF, and the above content is for reference