BTA204-600E,127

Series:	--
Packaging:	Tube
Part Status:	Active
Triac Type:	Logic - Sensitive Gate
Voltage - Off State:	600V
Current - On State (It (RMS)) (Max):	4A
Voltage - Gate Trigger (Vgt) (Max):	1.5V
Current - Non Rep. Surge 50, 60Hz (Itsm):	25A, 27A
Current - Gate Trigger (Igt) (Max):	10mA
Current - Hold (Ih) (Max):	12mA
Configuration:	Single
Operating Temperature:	125°C (TJ)
Mounting Type:	Through Hole
Package / Case:	TO-220-3
Supplier Device Package:	TO-220AB
Base Part Number:	BTA204

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Thyristors - TRIACs - BTA204-600E, 127 application field and working principle

Thyristors are a type of switching device that can be used to control power circuits. Thyristors are made up of multiple elements that are connected in series, hence the name "series thyristor". This series configuration adds to the robustness of these devices, allowing them to be used in high power applications. The BTA204-600E, 127 is an example of a series Thyristor designed for industrial applications. It is an epitaxial TRIAC that is mounted on a metal oxide semiconductor (MOS) integrated circuit (IC) module.The BTA204-600E, 127 belongs to the TRIAC family of thyristors, which can be used for switching, controlling, and protecting power circuits. TRIACs are capable of bidirectional current conduction, meaning they can be used to switch current in both directions. This makes them suitable for controlling AC circuits, as they are able to switch current at any time, even in the middle of a half cycle.The BTA204-600E, 127 has a maximum current rating of 600 Amps and a maximum gate voltage of 20V. It can operate over a temperature range of -55 to ie; +150 °C. It is also reverse blocking capable, meaning it can be used to block reverse current flow.The BTA204-600E, 127 can be used in a wide variety of applications, including power supplies, motor drives, heating elements, and lighting controls. It can also be used in AC circuits for controlling AC motors, controlling phases, or controlling the speed of AC motors.The working principle of a TRIAC is based on two electrodes: the main electrode (MT2) and the control electrode (G). When a voltage is applied to the G electrode, it creates a conducting region in the MOS IC, allowing a current to flow from the MT2 to the G electrode. This current flow is then used to switch the TRIAC on and off.The BTA204-600E, 127 has a fast switching action and can be used in high frequency applications. It also has a low latching current, meaning it can be used to stabilize power circuits that experience large loads quickly. Additionally, its high power dissipation capabilities make it suitable for applications such as motor drives, heater controls, and lighting controls.In conclusion, the BTA204-600E,127 is an epitaxial TRIAC that is designed for industrial applications. It has a high current rating and a fast-switching time and can be used in a variety of applications, from motor drives to lighting controls. Its low latching current and high power dissipation capabilities make it an ideal choice for power circuits that need to quickly and reliably switch high amounts of power.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description