BTA206X-800ET,127

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Thyristors - TRIACs are electronic components used to control electric current and voltage. They are composed of three terminals and two electrodes, with one terminal controlling the on-off state and the other two controlling the current flow. The BTA206X-800ET,127 is a TRIAC device with a rated current of 800mA, rating of between 10V and 200V, and gate trigger current of 4.5mA.

TRIACs are commonly used for AC switching, phase control, and motion control applications. In AC switching, the TRIAC\'s gate terminal is connected to a pulse input that is triggered to turn the device on and off. When the TRIAC is off, the voltage waveform is blocked and thus current is not present. When the TRIAC is on, the waveform is free to flow and current is present. In this way, AC power can be switched easily and efficiently. In phase control applications, the TRIAC\'s gate is connected to a continuously adjustable pulse source, allowing the device to control the amount of current flow. This opens up a range of applications such as light dimming and motor speed control. Finally, in motion control applications, the TRIAC can be used to control the speed of a motor by varying the amount of current applied to it.

The BTA206X-800ET,127 TRIAC is designed for use in AC switching and motion control applications. It is a relatively low-power device with a maximum on-state current of 800mA. The device is rated for use with AC voltages of between 10V and 200V, with a typical gate-trigger current of 4.5mA. The device\'s gate-trigger voltage operates between 1V and 5V, and its on-state voltage drop is typically half the DC blocking voltage. The device is also capable of withstanding transient voltages of up to 600V.

The BTA206X-800ET,127 TRIAC is a relatively simple device to use, but its operation must be understood in order to ensure its safe and effective use. The gate terminal is connected to a control signal, usually a pulse or variable voltage, which is used to control the on and off state of the device. When the control signal is applied, a current passes through the gate terminal, turning the device on. If the control signal is removed, the TRIAC will turn off, which allows the current to be blocked. The BTA206X-800ET,127 TRIAC must be used within its specified voltage and current ratings to ensure safe operation.

The BTA206X-800ET,127 TRIAC is a useful tool for controlling current and voltage in AC switching and motion control applications. Its ability to switch current on and off quickly and its relatively low gate trigger current make it a versatile device. Care must be taken to ensure its ratings are not exceeded, but with this in mind, the BTA206X-800ET,127 can be confidently used in many different applications.

The specific data is subject to PDF, and the above content is for reference