BTA212X-600D,127

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Thyristors - TRIACs are a family of three-terminal semiconductor components commonly used for electrical power control.They are available in a variety of sizes and current ratings, making them especially suitable for low power operations as well as high power applications.The BTA212X-600D,127 is a TRIAC particularly designed for AC voltage switching and phase control applications.Its operating voltage is up to 600 V and its maximum RMS current is 127 A,with a ultra-fast recovery time of 15 ns.

The Thyristor - TRIAC is basically a three-terminal component.At first,it blocks current through the device until its gate current reaches certain threshold value.Then sensitive gate current triggers device to switch from inverted to forward state,applying voltage to a load connected across its two main terminals.

Thyristors - TRIACs are mainly used for AC power control,and are mainly preferred over solid-state relays because of their fast switching times.When compared to an SCR,the TRIAC allows both positive and negative parts of the load current to be controlled by applying gate voltages of either polarity.The BTA212X-600D,127 is an ideal TRIAC for AC voltage switching and phase control applications.It can be used for applications such as light dimmers,motor speed control,temperature controllers,variable speed drives,motor soft-starters and frequency changers.

The TRIAC is most often used in half-wave AC control circuits,where the current can either be switched on or off.It is usually connected in series with a resistor and capacitor in a full-wave AC control circuit, thus providing greater control.When considering a TRIAC\'s working principle,the TRIAC is said to conduct in both directions between its main terminals.Current only flows through the TRIAC when a suitable voltage is applied between its gate and main terminals.

For proper operation, the BTA212X-600D,127 needs to be bias with a voltage of more than 20 V and a maximum current of 5 mA. The TRIAC\'s maximum operating current can be changed by varying external biasing resistance.It is important to consider the gate characteristics of a TRIAC.The gate triggering voltage affects the on-state voltage and current of the TRIAC,and its triggering current affects the off-state resistance of the device.The BTA212X-600D,127 has a low gate sensitivity which reduces the amount of current required to trigger the device,making it suitable for low power operations.

In addition,the TRIAC\'s on-state and holding current,as well as its maximum turn-off time,are important parameters to consider when using this device.The maximum turn-off time of the BTA212X-600D,127 is 15 ns,making it suitable for high power applications.The device also features a surge protection diode,which helps protect the TRIAC from any reverse voltages.

To conclude, the BTA212X-600D,127 is a TRIAC particularly suited for AC power control and phase control applications.It has a maximum operating voltage of 600 V,its maximum RMS current is 127 A and its maximum turn-off time is 15 ns.The device is especially suitable for low power operations as well as high power applications due to its low gate sensitivity.

The specific data is subject to PDF, and the above content is for reference