BTB10-600BWRG

Series:	Snubberless™
Packaging:	Tube
Part Status:	Active
Triac Type:	Alternistor - Snubberless
Voltage - Off State:	600V
Current - On State (It (RMS)) (Max):	10A
Voltage - Gate Trigger (Vgt) (Max):	1.3V
Current - Non Rep. Surge 50, 60Hz (Itsm):	100A, 105A
Current - Gate Trigger (Igt) (Max):	50mA
Current - Hold (Ih) (Max):	50mA
Configuration:	Single
Operating Temperature:	-40°C ~ 125°C (TJ)
Mounting Type:	Through Hole
Package / Case:	TO-220-3
Supplier Device Package:	TO-220AB
Base Part Number:	BTB10

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Thyristors - TRIACs: Application Field and Working Principle

Thyristors, commonly known as TRIACs, are three-terminal devices which act as a switch in electrical circuits. These devices are widely used in a variety of applications, including variable-speed motor controls, heater control, lighting control, dimmers and other power control applications. The BTB10-600BWRG is a triac device with a turn-on voltage rating of 600 volts and a wattage rating of 10 amps. A thyristor consists of two p-n junctions similar to that of a transistor. However, unlike a transistor which amplifies an electric signal or controls the electric current through one of its junctions, a thyristor is designed to switch current on and off when instructed by an electric signal across its two junctions. When the potential difference between the two junctions is high enough, the device will switch on. This is known as the “break-over” point. The device will switch back off again when the potential difference between the two junctions is reduced to a certain voltage, or “lines-out” point. A triac is a three-terminal thyristor that is able to control the current flow in both directions of current flow. It is composed of two thyristor modules, an anode, and a gate. A voltage applied between the anode and gate will break-over and commence current conduction through both directions. When the triac is to be turned off, the current flow is blocked by reducing the anode-to-gate voltage. The BTB10-600BWRG is capable of a turn-on voltage of 600 volts and a wattage rating of 10 amps, making it suitable for a range of applications where a substantial current is controlled. In real-life applications, triacs are used in a wide array of applications that require cyclic control over electric current. One common application is motor control. The triac allows for a more precise control over the starting and stopping of the motor. In lighting applications, the triac is used to dim the light. By varying the pulse into the gate, the power used by the light can be reduced, resulting in a dimmer light. Another significant application for triacs is in PWM (pulse width modulation) circuits. These circuits are used to generate high-frequency pulses to the load, allowing for greater control and energy efficiency. The BTB10-600BWRG triac is a popular component in many applications thanks to its robust design. Its 600-volt break-over point and 10-amp wattage make it ideal for controlling large electric currents with precision. Its easy integration into existing circuits also make it a great choice for both new and retrofit installations. As a result, the BTB10-600BWRG is a common component found in motor control, lighting control, and PWM applications across the globe. The thyristor is a very valuable device in the control of electric current in many electronic circuits. The triac allows for greater control in a wide range of applications, such as motor control, lighting control and PWM. The BTB10-600BWRG is a triac device with a break-over voltage of 600 volts and amperage rating of 10 amps, providing reliable and precise control in a variety of applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description