BU2510-E3/51

Series:	--
Packaging:	Tray
Part Status:	Active
Diode Type:	Single Phase
Technology:	Standard
Voltage - Peak Reverse (Max):	1kV
Current - Average Rectified (Io):	3.5A
Voltage - Forward (Vf) (Max) @ If:	1.05V @ 12.5A
Current - Reverse Leakage @ Vr:	5µA @ 1000V
Operating Temperature:	-55°C ~ 150°C (TJ)
Mounting Type:	Through Hole
Package / Case:	4-SIP, BU
Supplier Device Package:	isoCINK+™ BU

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

A bridge rectifier is an electrical circuit that converts alternating current (AC) to direct current (DC) by connecting four diodes in a bridge formation. The BU2510-E3/51 is a single-phase full wave bridge rectifier. In this article, we will look at the application field and working principle of the BU2510-E3/51.

Application Field of BU2510-E3/51

The BU2510-E3/51 bridge rectifier can be found in many electronic circuits. It is mainly used for converting AC power to DC power for powering DC circuits, such as DC motors, LEDs, and halogen lights. The rectifier is also used for battery charging, DC welding, and other DC applications.The BU2510-E3/51 is the optimal choice for many applications because of its advantages over other rectifier components. It has a low total harmonic distortion level and a faster response time. Additionally, it offers better efficiency and higher power output than other rectifiers. It is also able to withstand severe environment conditions and ensures long service life.

Working Principle of BU2510-E3/51

The BU2510-E3/51 is composed of four diodes connected in a bridge formation. When AC power is applied to the bridge rectifier, the diodes conduct in a pattern to produce an output current. The output current is the sum of the currents of each diode in the bridge.The current of the first diode is in phase with the AC power and so it is referred to as the “in phase” diode. The second diode produces a current that is out of phase with the AC power and is referred to as the “out of phase” diode. The third and fourth diodes produce a current that is equal and opposite to the current of the first diode. When the AC power is applied to the bridge rectifier, the diodes conduct in a pattern. Each diode is forward biased during its positive half cycle, conducting current for the positive portion of the AC cycle. During the negative cycle, the diodes are reverse biased, so they do not conduct any current. This process is repeated, resulting in a pulsating DC output voltage.

Conclusion

The BU2510-E3/51 is a single-phase full wave bridge rectifier, which is widely used in many electronic circuits. It has low total harmonic distortion level and a faster response time, as well as better efficiency and higher power output than other rectifiers. The working principle of the BU2510-E3/51 is based on four diodes connected in a bridge formation, which produces an output current by conducting in a pattern.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description