BU25105S-M3/45

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Bridge rectifiers are an important application field for BU25105S-M3/45, as it offers single phase full wave Rectification for AC to DC power conversion. The BU25105S-M3/45 is particularly suited to this job, as it has a rather unique package design and high current capability.

The BU25105S-M3/45 bridge rectifier is housed in a unique hermetically sealed package and can provide a full wave rectification in a single package size. It measures just 9.8 x 10.4 x 4.4mm, making it an ideal choice for space saving applications, but still providing high current capability. The overall robustness and hermeticity of the package also means that it is an ideal choice for use in adverse environments.

The fundamental working principle of the BU25105S-M3/45 bridge rectifier is that, when an AC voltage is applied across the two input terminals, the diodes form a device with two closed loops and two diode bridges. This configuration allows alternating half-cycles of the input voltage to be positive and negative, respectively, meaning that the output voltage will be the sum of the half-cycles.

The logical configuration of the four individual diodes means the output voltage of the bridge rectifier can be inverted depending on the input voltage orientation. As an example, if the input voltage is increasing from -Vin to +Vin/2, the output voltage will decrease from -Vout to +Vout/2. Similarly, if the input voltage is decreasing from +Vin to -Vin/2, the output voltage will increase from -Vout to +Vout/2.

As the four diodes are connected forming a bridge circuit, the current flowing through the BU25105S-M3/45 bridge rectifier is always of the same polarity, is well-controlled, and can offer good efficiency. In addition, since the BU25105S-M3/45 bridge rectifier has a large current capable of carrying high voltages, it is well suited for peak current applications.

Generally, the BU25105S-M3/45 bridge rectifier can handle much higher voltages than ordinary diode-based full-wave rectifiers and is ideally suited for applications that require low harmonic distortion and high efficiency. The BU25105S-M3/45 is an excellent choice for supplying power to switching mode power supplies, motor drives and lighting control systems.

In conclusion, the BU25105S-M3/45 bridge rectifier has a unique package design and is capable of providing single phase full wave rectification, allowing AC to DC power conversion in a wide range of environments. Its high current capability and excellent efficiency make it an ideal choice for peak current applications and for supplying power to switching mode power supplies and motor drives.

The specific data is subject to PDF, and the above content is for reference