BU4224FVE-TR Integrated Circuits (ICs)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Power management integrated circuits (PMICs) play an important role in managing the power supply of an electronic circuit. PMICs are responsible for tasks such as: (1) translating the power inputs from the power supply into a regulated voltage for the electronic components; (2) controlling the output of the power supply to prevent power overloads; (3) providing precise levels of power to different components; (4) protecting sensitive circuits from power surges and (5) monitoring the power supply in order to detect any faults. Supervisors are a type of PMICs used to monitor the power supplies of an electronic device. This article will focus on the BU4224FVE-TR application field and its working principle.

The BU4224FVE-TR is an integrated high-precision supervised circuit especially designed for use with the "PowerGood" signals generated by modern computer power supplies. Manufactured by ROHM Semiconductor, the circuit provides an accurate output compatible with logic circuits. It consists of a power supply monitor, an oscillator, and a high-speed shutdown circuit all packed in a small SOP-4 package.

The BU4224FVE-TR is used in a wide range of electronic devices such as computers, networking systems, audio and video equipment and others. Its main purpose is to detect power disturbances or fault conditions such as overvoltage, overcurrent, or short-circuit. When such a fault is detected, the BU4224FVE-TR sends a signal to the connected equipment so that the equipment can be safely shut down or enter into a safe mode. The circuit also provides an additional means of protection against overvoltage and overcurrent by providing a reset signal in case of a fault condition.

The BU4224FVE-TR works by constantly monitoring the output voltage of the power supply. It is configured to react to changes in voltage within a certain pre-determined range. For example, if the voltage exceeds the configured upper or lower limit, the circuit will send a reset signal and the power supply will be shut down. The circuit also monitors any other voltage output signals such as \'PowerGood\' signals. If these signals indicate an incorrect voltage or a fault condition, the circuit will send a reset signal.

To ensure the correct operation of the BU4224FVE-TR, it needs to be connected to the power supply using three wires: the positive and negative supply lines, and the PowerGood signal line. These three wires ensure that the circuit can accurately measure the voltage of the power supply and detect a fault condition. The circuit also needs to be connected to the primary output voltage in order to detect any overvoltage or undervoltage conditions. The BU4224FVE-TR also includes a built-in voltage regulator and a reset circuit.

The voltage regulator ensures that the operating voltage for the circuit is always within a predetermined range. If the operating voltage exceeds or falls below this range, the voltage regulator will reduce or increase the voltage accordingly. The reset circuit is used to reset the power signal in case of a fault condition. This reset signal can be sent to the equipment connected to the power supply in order to safely shut it down or put it in a safe mode.

In conclusion, the BU4224FVE-TR is a high-precision supervising circuit designed to detect fault conditions in the power supply of an electronic device. It works by continuously monitoring the output voltage of the power supply and sending a reset signal when a fault condition has been detected. The circuit also includes a voltage regulator and reset circuit which can be used to ensure that the operating voltage is always within a predefined range and reset the power signal in case of a fault condition.

The specific data is subject to PDF, and the above content is for reference