BUJ302AD,118

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The BUJ302AD,118 is a single bipolar transistor designed for a variety of general purposes and is typically used in low-frequency, low noise amplifiers and switches.

The BUJ302AD,118 is a PNP Bipolar Junction Transistor (BJT), meaning that the current flowing into the base is used to control the current flowing between the emitter and collector. It has a collector current rating of 1A and a voltage rating of 50V. It has an amplification factor (or gains) of 150. The maximum power dissipation rating for the BUJ302AD,118 is 1W.

The BUJ302AD,118 can be used as a switch, amplifier and/or output driver. They can be used in a wide variety of switching applications such as in controlling motors and relays, in security systems, lighting circuits and power supplies, as well as in computing and telecommunication systems.

For voltages below 10V, the BUJ302AD,118 can be used as a regular amplifier with a gain of approximately 150. The voltage and current settings should be within the ratings in order for the maximum gain to be achieved.

It can also be used to drive high current loads such as relays and motors. An external resistor placed between the collector and base terminals is necessary in order to limit the base current as well as to prevent the transistor from consuming too much current. The current gain in this mode is typically 10.

The BUJ302AD,118 allows for precise switching and can be used in flip-flop circuits, digital logic circuits and logic gates for applications such as memory circuits, logic control, data converters and logic gates. When the current at the base is above the control voltage, the transistor is turned on and current flows through the collector. When the current is less than the control voltage, the transistor is turned off and no current flows.

In sum, the BUJ302AD,118 is a single PNP bipolar junction transistor designed for a variety of general purposes. This versatile device can be used as a regular amplifier, a switch, an output driver or a logic gate. It has a collector current rating of 1A and a voltage rating of 50V and a maximum power dissipation rating of 1W. The current gain is 10 when used as an output driver and 150 when used as an amplifier. Furthermore, when the current at the base is above the control voltage, the transistor is turned on and current flows through the collector, whereas when the current is less than the control voltage, the transistor is turned off and no current flows.

The specific data is subject to PDF, and the above content is for reference