BUJ303A,127

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

BUJ303A,127 Transistors - Bipolar (BJT) - Single

The BUJ303A,127 is a single bipolar junction transistor (BJT) featuring excellent DC and AC characteristics, low collector to emitter saturation voltage, and good noise immunity. It is extensively used in amplification, switching, and controlling applications. The operating voltage range is from -40V to +40V. The maximum power dissipation is 250W and the peak collector current is 200mA. With an operating temperature ranging from 0°C to 150°C, it is suitable for a variety of industrial and automotive applications.

BJT transistors are three-terminal semiconductor devices that feature three components: emitter, base, and collector. The emitter is a negative terminal connected to a P-type material, while the collector is a positive terminal connected to an N-type material. A small amount of current flowing between the base and emitter causes the transistor to switch off or on, thereby allowing a much larger current to flow between emitter and collector in either reverse or forward direction. BJT transistors can be used in an array of configurations, including as a switch, amplifier, and current limiter depending on a number of parameters such as the voltage and current ratings, type of material, and number of transistors employed.

The BUJ303A,127 bipolor junction transistor (BJT) has several advantages when it comes to switching applications. For instance, it has a low collector to emitter saturation voltage (Vce) of 0.2V, meaning that less energy is needed to turn the bys off as compared to other types of transistors. It also has a low on-state resistance of less than 0.1Ω, thus providing a lower current requirement when it is on. Finally, it can handle up to 200mA of peak collector current, making it well-suited to high current requirements.

In addition to its switching properties, the BUJ303A,127 bipolar junction transistor (BJT) can also be used as an amplifier. It works by allowing current to flow between the emitter and collector terminals, thereby amplifying the signal. The base terminal acts as the input for the transistor, and the collector is the output. The gain of the BJT can be adjusted by varying the ratio of the current through the base and collector terminals. This is done by changing the size of the base resistor or the amount of current flowing through the base terminal. By doing this, the BJT can be used to increase the strength of an electrical signal.

Finally, BJT transistors can also be used to limit current. This is typically done by connecting the emitter terminal to a resistor and the base terminal to a diode or an integrated circuit. This limits the current in the emitter to the saturation current of the diode or the current output of the integrated circuit. This can be helpful in applications where excessive current can cause damage to a device.

In conclusion, the BUJ303A,127 bipolar junction transistor (BJT) is a reliable and versatile device. It offers excellent DC and AC characteristics, low Vce, and good noise immunity. This makes it suitable for a variety of switching, amplification, and current limitation applications. With a wide operating temperature range and high peak current capability, the BUJ303A,127 is an ideal choice for industrial and automotive applications.

The specific data is subject to PDF, and the above content is for reference