BUK218-50DY,118

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

PMIC Gate Drivers are incredibly versatile in providing an efficient and cost effective method for controlling the currents in a device which are supplied from sources with a low power density. They are most commonly used in applications which require current control and switching at low voltage level, such as microcontroller power. The BUK218-50DY,118 is a PMIC Gate Driver module which has been developed in order to provide efficient current control in low voltage applications.

The BUK218-50DY,118 consists of two channels, one for positive sources and one for negative sources. The output current of each channel is controlled by an external resistor or potentiometer, and the output is adjustable between 0V and VDD. This allows for very precise control of current and makes the BUK218-50DY,118 very efficient in applications which require small voltage switching.

The BUK218-50DY,118 is designed to allow high speed switching and accurate current control. This makes it ideal for applications such as microcontroller power, where current control and switching of low voltage levels are needed. With its low dielectric strength, it is also suitable for applications which require insulation from electrical noise.

The BUK218-50DY,118 also provides a wide range of operating voltages, making it suitable for a variety of different applications. The maximum internal supply voltage is VDD = 70V, and the minimum, VDD = 0.8V which is suitable for most low voltage applications. In addition, the output voltage range is adjustable through external resistors or potentiometers and is protected against various over-voltages and variations in temperature.

The input signal has a logic level range of 0.8V-1.8V, allowing for a wide variety of logic levels. The BUK118-50DY also has a built in shutdown mode, in order to prevent any excessive current from flowing in the case of an over-voltage, as well as to give the user the ability to put the device into a shutdown mode when required. This allows for safe and controlled operation of the BUK218-50DY,118 with minimal effort from the user.

The BUK118-50DY,118 also features an adjustable dead-time control, allowing for accurate control of the PWM signal over various operating conditions. In addition, the module also has a slew rate control function, which is designed to help reduce the noise generated when driving large loads with high frequency square waves. This feature also helps reduce electrical noise, ensuring that the signal being sent is as clean and accurate as possible.

The BUK218-50DY,118 is designed to be used in a wide range of applications, such as controlling motors, pumps and other low voltage power devices. The module has been designed to provide efficient current control, reliable protection and highly accurate output, making it an ideal choice for applications involving current control and switching of low voltages.

The BUK218-50DY,118 is a versatile and reliable PMIC Gate Driver module, offering a cost effective solution for current control and switching of low voltages. By combining high speed switching, adjustable output voltage range and accurate current control, the BUK218-50DY,118 offers a cost effective and efficient solution for low voltage applications.

The specific data is subject to PDF, and the above content is for reference