Series:	--
Packaging:	Tube
Part Status:	Active
Diode Configuration:	1 Pair Common Cathode
Diode Type:	Standard
Voltage - DC Reverse (Vr) (Max):	50V
Current - Average Rectified (Io) (per Diode):	18A
Voltage - Forward (Vf) (Max) @ If:	1.15V @ 20A
Speed:	Fast Recovery = 200mA (Io)
Reverse Recovery Time (trr):	25ns
Current - Reverse Leakage @ Vr:	10µA @ 50V
Operating Temperature - Junction:	-65°C ~ 150°C
Mounting Type:	Through Hole
Package / Case:	TO-220-3
Supplier Device Package:	TO-220AB

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

The BYV32-50-E3/45 is a bridge rectifier array that is typically used to rectify AC signals and power sources into DC signals or power sources. This type of rectifier is commonly used in low voltage and low-power applications.

Application Field

The BYV32-50-E3/45 is usually used in applications such as AC to DC power conversion and DC power supply regulation. It has a variety of uses such as rectifying AC input signals from inverters, motor control systems, power supplies, uninterruptible power supplies, and general electronics equipment. In addition to its rectification capabilities, the bridge rectifier array can also be used to buffer signals or provide EMI/RFI protection. It can be used to prevent excessive levels of high frequency signals from entering the power supply circuits in order to ensure a stable operation. The BYV32-50-E3/45 is also used in automotive applications such as power window and seat motors, electric fuel pumps, and engine control systems. It is also used to provide power in a variety of medical, industrial, and military applications.

Working Principle

The BYV32-50-E3/45 works by allowing a current to flow from a positive voltage source to a negative voltage source. The current is then switched back and forth between the two voltage sources using a switching mechanism called a transistor. When the transistor is switched on, the current is allowed to flow from the positive voltage source to the negative voltage source. When the transistor is switched off, the current is stopped and then switched back to the positive voltage source.The BYV32-50-E3/45 is capable of handling an input voltage of up to 50 volts and a current up to 3 amperes. Its peak forward surge current is 8 amperes and the reverse voltage is 45 volts.

Conclusion

The BYV32-50-E3/45 bridge rectifier array is a versatile and reliable device suitable for a wide range of electronic applications. It can be used to rectify AC signals and power sources into DC signals or power sources. It can also be used to buffer signals or provide EMI/RFI protection. Additionally, it is commonly used in applications such as automotive, medical, industrial, and military applications. The BYV32-50-E3/45 is capable of handling an input voltage of up to 50 volts and a current up to 3 amperes.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description