BZG04-15-M3-18

Series:	BZG04-M
Packaging:	Tape & Reel (TR)
Part Status:	Active
Voltage - Zener (Nom) (Vz):	18V
Tolerance:	--
Power - Max:	1.25W
Current - Reverse Leakage @ Vr:	5µA @ 15V
Voltage - Forward (Vf) (Max) @ If:	1.2V @ 500mA
Operating Temperature:	150°C (TJ)
Mounting Type:	Surface Mount
Package / Case:	DO-214AC, SMA
Supplier Device Package:	DO-214AC (SMA)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction of BZG04-15-M3-18 Diode

BZG04-15-M3-18 diodes are part of the Zener single family and are used to regulate voltage output in various circuits. It is a small signal diode rated for a current of 15 milliamps and a maximum voltage of 18 volts. This makes it well-suited for certain applications where its small size is also an advantage.

Application Field of BZG04-15-M3-18 Diode

BZG04-15-M3-18 diodes are used in a wide variety of applications where voltage regulation is needed. This includes, but is not limited to the following: * Power supplies and voltage regulators* Audio amplifiers* Radio and TV receivers* Computers and peripheral equipment* Telecommunications systems* Automotive electronics

Working Principle of BZG04-15-M3-18 Diode

The working principle of BZG04-15-M3-18 diodes is based on the fact that they are Zener single diodes. This type of diode is designed such that when a voltage higher than its designed value is applied across it, it will break down and conduct in a reverse direction. This allows it to act as a regulator, ensuring the output voltage will not exceed a preset level.The BZG04-15-M3-18 diode is designed to limit the voltage output across it to 18 volts when the forward voltage (Vf) is applied to it. When the voltage across the diode exceeds this level, it will breakdown and start to conduct in reverse, allowing a steady flow of current to regulate the output voltage. It is important to note that Zener diodes can only handle small currents and that they can be damaged by too much current passing through them. Therefore, it is important to ensure that the current passing through the diode is limited to its rated value of 15 milliamps.

Conclusion

In conclusion, BZG04-15-M3-18 diodes are part of the Zener single family and are used in a variety of voltage regulating applications. These diodes are designed to limit the output voltage to 18 volts and must be used with caution to ensure that the current passing through them does not exceed its rated value.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description