CAT4240TD-GT3

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The CAT4240TD-GT3 (hereafter referred to as the ‘GT3’) is a member of the CAT42XX-family of LED drivers and belongs to the Category of PMIC - LED Drivers. It has been developed to provide a cost effective solution for lighting applications. This article will explain the various application fields and working principles of the GT3.

Application Field

The CAT4240TD-GT3 is designed to drive LEDs up to a maximum forward current of 350mA, at a wide range of forward voltages up to 30V. It is used primarily for space-constrained and power-constrained applications. It is well-suited for industrial, consumer, and automotive applications such as interior and exterior lighting systems, backlighting systems, and automotive daytime running lights. It is also used to provide general illumination in residential and commercial spaces like retail stores and warehouses. Besides, the GT3 can be used in solid-state lighting fixtures, light fixtures and luminaires.

Features and Working Principle

The CAT4240TD-GT3 includes a range of features to improve the performance of LED applications. Task-shifting logic is used to regulate the output current with the external device. Illuminance sensing allows the circuit to adjust the LED brightness based on the ambient light levels. The GT3 also includes a thermal shutdown protection that ensures that no heat is generated by the LEDs, which may cause damage to the device.

The GT3 is designed on the basis of voltage-mode LED driver topology, meaning that the LED output current is proportional to the applied supply voltage. The LED current is set by the external resistor and a control logic. When the output current rises above the set value, the device enters a linear regulation mode. This compensates for any variations in the supply voltage or external voltage drop, thus maintaining the LED current at a constant level.

The GT3 also includes constant-current limiting and fault-protection features. The device can detect errors in the supply voltage and short-circuits to the LEDs, and then shut off the output current to prevent further damage. Additionally, the GT3 features a current scalability of up to 500mA, allowing for a wider range of applications. The device also features two adjustable soft-start features to reduce inrush current, improve the stability of the LED, and extend the lifetime of the LED. Moreover, the GT3 incorporates two enable inputs to allow for multiple lighting control applications.

Conclusion

The CAT4240TD-GT3 is an ideal LED driver for space-constrained and power-constrained applications. It offers a wide range of features that enable efficient LED operation, including task-shifting logic, illuminance sensing, thermal shutdown protection, and current scalability up to 500mA. The device is designed based on voltage-mode LED driver topology, and it also includes fault-protection and adjustable soft-start features. The GT3 can be used across a variety of applications, including industrial, consumer, and automotive lighting systems.

The specific data is subject to PDF, and the above content is for reference