CC1101RGPT RF/IF and RFID

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

CC1101RGPT is a radio frequency (RF) transceiver IC, designed to operate in the worldwide 868/915 MHz ISM bands. This IC simplifies design implementation and operating costs for customer applications. The CC1101RGPT IC consists of the following: two low-IF receivers, one transmitter, a baseband logic section, and an 8052 MCU with a Flash memory.

In general, CC1101RGPT application field and working principle can be applied in many situations, including: wireless medical monitoring, remote patient monitoring, energy and security solution for industrial automation, smart homes and industrial networks, Internet of Things (IoT), sensor network and location based services.

The working principle of CC1101RGPT lies in the radio-frequency (RF) transceiver. This device is composed of a low noise amplifier, RF amplifier, transmitter/receiver switch, integrated frequency synthesizer (IFS) and a digital interface. The IFS generates a reference frequency that is used to control the operating frequency of the device with a minimum of external components. Moreover, the IFS eliminates the need for manual circuit tuning.

The digital interface is used to control the operating mode and other parameters of the device. It also allows data to be transmitted and received with an FCC authorized protocol. The data is passed between the transmitter and receiver portions of the device by means of a transmission line. This transmission line is used to send data and commands to the receiver.

The low noise amplifer is used to boost the received signal. This signal is then passed to the RF amplifier for further gain. The RF amplifier increases the power of the signal and transmits it to the antenna. At the same time, it also transmits RF signals from the antenna to the transmitted signal input of the device.

The transmitter/receiver switch makes it possible to turn the transmitter and receiver portions on and off as required. It also helps to ensure that only one portion is operating at a time, thus avoiding interference. The device also includes a serial interface to connect it to the PC or other device, if necessary.

The device is based on a 8052 MCU with a Flash memory, which is used to store instructions and data while it is powered. The Flash memory is used to store the firmware for the device as well as the settings and data that are to be transmitted and received. The instructions stored in the Flash memory are then executed by the MCU.

CC1101RGPT application field and working principle is used to create systems that require low power, higher reliability, and longer range. The working principle of the device enables it to be used in applications such as wireless medical monitoring, remote patient monitoring, energy and security solutions for industrial automation, and Internet of Things (IoT), sensor network and location based services.

The specific data is subject to PDF, and the above content is for reference