CC130SA300

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Contactors (Electromechanical) are used in a wide variety of applications to control the flow of current or voltage through an electrical circuit. The CC130SA300 is an electromechanical contactor that is designed to control the flow of current between two separate circuits. Its primary purpose is to act as a switch to turn on and off an electrical device or system, as well as provide additional safety and protection for other components in the circuit.

The CC130SA300 is made up of two main components: a contactor coil and a mechanical contact plate. The contactor coil is the energizing component that creates an electromagnetic field when a voltage is applied to it. This field attracts the contact plate, which is mounted on a movable armature, and causes it to make contact with the contact terminals. When the contact plate is applied to the terminals, an electrical connection is established, completing the circuit.

The contactor coil is typically energized by a voltage from a switch or a relay. This voltage is regulated and may be DC, single-phase AC, or three-phase AC. A voltage is applied to the contactor coil, which then creates an electromagnetic field around it. The armature is then attracted to the contactor coil and makes contact with the contact terminals. This connects the positive and negative poles of the circuit, completing the circuit and providing power to the electrical device or system. The spring inside the contactor also helps to ensure that the contact plates remain closed until the power source is removed.

In addition to providing protection and control for the circuit, the CC130SA300 contactor also has a number of other benefits. For example, it is capable of switching large currents with relatively low voltage and can reduce the arc when the coil is de-energized. This helps to reduce any hazardous sparks or arcing that can occur when high-voltage or high-amperage circuits are switched.

The CC130SA300 contactor is an essential component of any motor control system and is used in a variety of industrial and commercial applications. It can be found in machinery, elevators, air conditioning systems, and other areas where reliable and safe switching of current and voltage is required. It is also an important part of any electrical safety system, providing additional protection for components in the circuit and preventing dangerous arcing from occurring when switching large currents or high voltages.

The specific data is subject to PDF, and the above content is for reference