CD4053BM96E4

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Interface IC chips, such as analog switches, multiplexers, and demultiplexers, are essential components of modern electronic devices. They are commonly used to send and receive signals between digital and analog components of an electrical system. The CD4053BM96E4 is a widely used chip in this category, as it is a low power, low voltage, and robust 5-line to 3-line analog multiplexer/demultiplexer.

This device multiplexes one of the five inputs to the single output, depending on the binary address inputs (A0, A1). The device can be used as a four- to two-line multiplexer or a two-to-four-line demultiplexer. The analogue switches have a maximum ‘on’ resistance of 100Ω, and the device is powered by a single +5V power supply.

A typical application of the CD4053BM96E4 is in voltage selection and direction inverting. This is the most commonly used feature of the device, which allows the selection of one of four analog voltages to be selected and provided at the output, depending on the logic level of the select inputs. The direction invert feature can be used to invert logic levels from one input to the next. Additionally, the device can be used to merge two logic levels from different sources, where the two inputs can be switched based on the logic levels of the select inputs.

The essential working principle of the device is as follows: When both the address inputs (A0 and A1) are at logic ‘0’, the output is at logic ‘0’. When either one or both of the address inputs are at logic ‘1’, the output is connected to one of the five inputs. Depending on the logic levels at A0 and A1, the output can be connected to one of the five analogue inputs.

The device has five dual-channel CMOS analog switches that are used to select the input signals. The device has a high-impedance state when no voltage is applied to the control pins, which makes it capable of switching both AC and DC signals. The analogue switches are also configured in a ‘reverse-blocking’ configuration, which makes it possible to switch between the inputs without data loss.

The CD4053BM96E4 is ideal for applications in:

• Automotive and automotive related systems
• Industrial control systems
• Telecom and datacom systems
• Battery powered systems
• Portable and remote devices

The device has low power consumption, and it has a relatively low on-resistance of only 100Ω. This makes it suitable for a wide range of applications, including automotive and industrial systems, where low power and high efficiency are essential.

The CD4053BM96E4 is a robust, low-voltage, low-power device that is suitable for a wide range of applications. It is capable of switching between analogue and digital signals and can be used to invert logic levels between different sources. Its all-CMOS construction makes it suitable for battery-powered applications as well.

The specific data is subject to PDF, and the above content is for reference