CD4053BPW

Switch Time (Ton, Toff) (Max):	--
Base Part Number:	4053
Supplier Device Package:	16-TSSOP
Package / Case:	16-TSSOP (0.173", 4.40mm Width)
Operating Temperature:	-55°C ~ 125°C (TA)
Crosstalk:	-40dB @ 6MHz
Current - Leakage (IS(off)) (Max):	100nA
Channel Capacitance (CS(off), CD(off)):	0.2pF, 9pF
Charge Injection:	--
-3db Bandwidth:	30MHz
Series:	--
Voltage - Supply, Dual (V±):	±2.5 V ~ 9 V
Voltage - Supply, Single (V+):	3 V ~ 20 V
Channel-to-Channel Matching (ΔRon):	5 Ohm
On-State Resistance (Max):	240 Ohm
Number of Circuits:	3
Multiplexer/Demultiplexer Circuit:	2:1
Switch Circuit:	SPDT
Part Status:	Active
Packaging:	Tube

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

CD4053BPW, an analog switch, multiplexer, and demultiplexer, is an integrated circuit that can be used to perform a wide range of switching, multiplexing, and demultiplexing functions. The device is a three-input multiplexer that can be used to route signals between two different locations. It can be used in a variety of applications, including radio and television broadcast, switching and distribution networks, industrial control systems, telecommunication systems, and other analog and digital applications.The device is composed of three N-channel MOSFETs (NFETs) that are connected in a three-input multiplexer configuration. Each of the three NFETs acts as a switch, allowing either the input or output to be selected. The device also contains a low power Schottky transistor and an output amplifier, which work together to increase the output voltage level.To control the device, logic signals are sent to the input pins (A,B, and C) of the multiplexer. Depending on the logic signals, the multiplexer will output either of the two signals connected to its input pins (A and B). For example, when the A pin is driven high and the B pin is driven low, the output of the device will be the A signal. The device\'s output can also be controlled by the C pin; when C is high, the output is sourced from A, and when C is low, the output is sourced from B.In applications where the device is used to switch signals, the switching speed can be improved by using the Enable (EN) pin. When the EN pin is driven low, the device will remain in its active state until the EN pin is driven high. This provides a faster switching speed, as the switch is already in an active state and only needs to be disabled in order to switch to a different signal.In addition to its use as an analog switch, multiplexer, and demultiplexer, the device can also be used in power control and voltage sensing applications. The device features a low power Schottky transistor that can be used in applications where the total power consumption is critical. The transistor can be used to control the current flow between the supply pins, which can be used to optimize the device\'s power consumption.The device can also be used for sensing the input voltage and outputting an appropriate signal. For example, the device can be used to detect the voltage level and then signal the processor when that voltage level has been exceeded. This can be used in applications such as temperature sensors and motor control, where the processor can be alerted when certain temperature or power levels have been exceeded.Overall, the CD4053BPW can be a versatile and highly efficient IC for performing a wide range of switching, multiplexing, and demultiplexing tasks. Its versatile design and efficient operation make it an ideal solution for many applications. It can be used in analog and digital systems to enhance performance, reduce power consumption, and provide reliable operation.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description