CD74AC151E

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The 74AC151E is a 8 to 1 multiplexer/data selector IC. This IC is made of high speed CMOS technology and is part of TTL logic family. As its name suggests, it routes the 8 given inputs to the single output on the basis of the select lines. This IC comes in the standard 14-pin DIP package and is widely used in TTL logic families due to its low cost and high speed.

The 74AC151E consists of two 4-Input multiplexers which are then combined to make a single 8-input multiplexer. Each multiplexer has 4 select pins (A1,A0,B1,B0) and a common enable pin (E). When the enable pin is at logic HIGH, the A/B selection lines determine which of the 4 inputs (I 0-3 and I 4-7 ) are routed to the output (Y). The outputs of both the multiplexers are then combined to produce a single output.

The 74AC151E is used in various applications such as digital multiplexer/demultiplexer, address decoder, memory decoder and data selector/ multiplexer. It is often used to convert 8-bit parallel data to serial for transmission in data transmission applications. It is also used in signal switching and data routing applications.

The working of the 74AC151E is relatively simple. The select lines (A1,A0, B1,B0) determine which of the 4 inputs (I 0-3 and I 4-7 ) are routed to the output (Y). The enable pin (E) is used to enable/disable the multiplexer. When the enable pin is low, the multiplexer is disabled and all the outputs are set to low logic. If the enable pin is high, the select lines determine which of the 4 inputs are routed to the output. The IC can be used to route 8 different signals (I 0-7 ) to a single output (Y) depending on the status of the select pins.

The 74AC151E is widely used for its low cost and high speed. It is used in various applications such as digital multiplexers/demultiplexers, address decoders, memory decoders, and data selectors/multiplexers. It is also used in signal switching and data routing applications. The working of the 74AC151E is relatively simple, and it can be used to route up to 8 different inputs to a single output depending on the state of the select pins.

The specific data is subject to PDF, and the above content is for reference