CD74AC151M96

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

CD74AC151M96 devices provide higher performance in a variety of logic and signal-switching applications. This device is a symmetrical, low-power digital multiplexer/demultiplexer operating from a single supply. It contains two 2-line-to-1-line data selectors/multiplexers and two 1-line-to-2-line demultiplexers. The common select inputs and enable input are active-low.

The CD74AC151M96 multiplexer/demultiplexer is designed to accept two select inputs and one enable input. The truth table is shown in Figure 1. When disable is low, the outputs reflect the select inputs ; when disable is high, all outputs are high-impedance.

A variety of applications can benefit from the low-power level and symmetrical circuit configuration of the CD74AC151M96 device, including data buffering and data protocol applications. A few examples include:

• System Memory Buffering
• Data FIFO System
• Data Bus Multiplexer/Demultiplexer
• Data Pattern Generator
• Data Path Management

The CD74AC151M96 is fabricated with complementary MOS (CMOS) technology and is provided in 14-pin SOIC and 14-pin TSSOP packages. This device is functional over the commercial temperature range of 0 °C to 70 °C and the industrial temperature range of –40 °C to +85 °C.

The working principle of the CD74AC151M96 is quite simple. Three select inputs (S0, S1, and S2) are used to select one of eight data inputs (D0–D7) and sent to the one or two outputs (Y0 and Y1). In addition, an enable input (E) is used to control the data selection process. When the enable signal is active (low), the device will select one of the eight data inputs based on the select inputs and output the data signal to the output pins. When the enable signal is inactive (high) all the output pins will be in a high impedance state.

The CD74AC151M96 device offers the following features: low power consumption, excellent noise immunity, and ultra-fast switching speeds. It is also fabricated with thick film CMOS technologies, which enables it to meet demanding timing and power requirements. Additionally, its symmetrical design helps reduce propagation delays and eliminate data pulling effects.

In conclusion, CD74AC151M96 is a low-power multiplexer/demultiplexer for signal switching applications in consumer and industrial systems. It is suitable for use in system memory buffering, data FIFO systems, data bus multiplexers/demultiplexers, data pattern generators, and data path management applications.

The specific data is subject to PDF, and the above content is for reference