CD74AC373MG4

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The CD74AC373MG4 is a 8-bit bus transceiver with output enable control. It is typically used in data transmission applications, as it allows data to be transferred between two buses. It is a high-speed tri-state device, with outputs available up to 1GHz. The AC373MG4 is part of the 74AC logic family, with typical rise and fall times of 5 ns and 8 ns respectively. The AC373MG4 also has wide standard logic levels, being TTL and CMOS compatible input and output.

The CD74AC373MG4 works using two main principles. The first is the use of latches. These latches, also known as storage elements, allow data to be stored for a certain period of time. This means that data can be transferred from one bus to another without being lost. The second operating principle is that of the output enable. This is the signal used to enable or disable the output and latch. When enabled, the device transmits data, and when it is disabled, data is retained in the latch.

The CD74AC373MG4 is typically used in applications such as digital timing, digital signal processing, serial data transmission and digital imaging. It can also be used in memory and memory mapping systems. As the CD74AC373MG4 works with data at the byte level, it is suitable for use in embedded controllers. This is because the controller needs to be able to access specific registers, and the CD74AC373MG4 can be used to convert between serial and parallel data formats.

The CD74AC373MG4 is a useful device for data transmission applications. Its high-speed design and latch architecture allow data to be transferred between two buses without loss. Its low power input and output makes it suitable for low power embedded systems, and its ability to switch between serial and parallel data formats makes it suitable for a wide range of applications.

The specific data is subject to PDF, and the above content is for reference