CD74ACT139M

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The CD74ACT139M is a signal switch, multiplexer, and decoder device from Texas Instruments. It is a dual 2-line to 4-line decoder/demultiplexer with address latches and totem-pole outputs. It is a versatile device that is used in a variety of applications for address decoding, data routing, and signal control.

The CD74ACT139M is based on CMOS technology and is compatible with HMOS, TTL and other logic families. It features open drain and level translation at the inputs and outputs. It is designed to use a wide range of supply voltages, from 3V to 15V, allowing it to be used in a variety of applications.

The CD74ACT139M has two, two-bit inputs and four, three-bit outputs. The inputs are labeled A1 and A2 and the outputs are labeled O0, O1, O2, and O3. The device is designed to detect two active-low bits in the address bus and activate one of the four corresponding outputs with a logic high level. The outputs can be used to control the enable and reset lines of other logic devicees, or to address memory and peripherals.

The CD74ACT139M uses voltage levels to represent the logical values "1" and "0". In order for the device to work correctly, the voltages of the logic input and output of the device need to be compatible. Therefore, when the device is used in applications with different logic families the input and output voltages need to be compatible. This can be done by using voltage level shifters to convert the input and output voltages to the appropriate level.

In addition to the voltage conversion, the CD74ACT139M also supports an active low enable signal. This signal is used to enable or disable the chip, allowing the device to be used in logic circuits where a global enable or reset line is required. The active-low enable is also used to latch the address bus inputs when the signal is asserted, allowing the decoder/demultiplexer to be used in address decoder applications.

The CD74ACT139M is a versatile signal switch, multiplexer, and decoder device that is suitable for a variety of applications. It can be used for signal routing, signal control, address decoding as well as data routing applications. It is compatible with multiple logic families and allows for voltage level conversion and latching of the address bus. It is a very popular device in the electronics industry and is widely used for many applications.

The specific data is subject to PDF, and the above content is for reference