CD74HC221PWT

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Logic - Multivibrators

CD74HC221PWT is a type of logic integrated circuit that acts as a multivibrator. It is part of a family of high-speed CMOS Logic ICs whose outputs can be and have been used to trigger or reset intermediate stages in various applications.CD74HC221PWT has two solid-state devices, one in which the output is pin B and the other in which the output is pin A. Pin A is the output of an odd number (1, 3, 5, 7) and pin B is the output of an even number (2, 4, 6, 8). The multi-vibrator consists of two interconnected inverters with a capacitor connected between the two outputs. The circuit is triggered by a one-time positive pulse at the trigger pin. The output of the pin A will go high and the output of the pin B will remain low. Then after the pulse, the output of the pin B will go high while the output of the pin A will remain low.

The primary application of the CD74HC221PWT is to provide current-flow indication in low-power logic circuits. It can also be used as a delay generator and a simple memory device in various applications. Furthermore, it can also be used to initiate and/or terminate various time-dependent processes or functions in any given system.

Apart from these, CD74HC221PWT can also be used in a variety of switching circuits such as, for example, in logic gates and flip-flops. Other applications include ring counters, divide-by-N synchronous counters and ripple counters. Moreover, CD74HC221PWT can also be used as a master/slave flip-flop as well as for gated noise sources, bias-generation circuits and square-wave generators.

The CD74HC221PWT has a supply voltage range from 0.1 V to 6V and is specified in the extended temperature range from -40°C to 125°C. It has an output voltage of 0.8V and a propagation delay time of typically 4ns at 5V. The device is available in an 8-pin PDIP or 8-pin SOIC package with a pin configuration as follows: Vcc, GND, A, B, TRIG, R1, R2 and OSC.

In order to operate, the CD74HC221PWT requires an oscillator and a trigger. The oscillator is used to set the multivibrator\'s frequency and duty cycle and can be external or internal. The frequency can be adjusted by changing the oscillator\'s resistance or capacitance. The trigger is a one-time positive pulse applied to the trigger pin which will cause the multivibrator to switch states.

The CD74HC221PWT is suitable for use in a variety of logic applications due to its high switching speed, low power consumption and compact size. It is also reliable and cost-effective, making it a great option for various consumer electronics designs.

The specific data is subject to PDF, and the above content is for reference