CD74HC4024MT

Timing:	--
Base Part Number:	74HC4024
Supplier Device Package:	14-SOIC
Package / Case:	14-SOIC (0.154", 3.90mm Width)
Mounting Type:	Surface Mount
Operating Temperature:	-55°C ~ 125°C
Voltage - Supply:	2V ~ 6V
Trigger Type:	Negative Edge
Count Rate:	35MHz
Series:	74HC
Reset:	Asynchronous
Number of Bits per Element:	7
Number of Elements:	1
Direction:	Up
Logic Type:	Binary Counter
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

CD74HC4024MT is a decade counter integrated circuit (IC) manufactured by Texas Instruments. It is used in digital systems to count to ten or divide the clock frequency by a factor of ten. The device consists of a master-slave flip-flop, four gated (buffered) outputs, a single active-low reset and ten divide-by-two stages, two divide-by-two stages of which are used to signal terminal count (TC). The low-power Schottky TTL (LS) version of the CD74HC4024MT is designed to accept a TTL-level signal and produce a complementary output. This IC is present in many digital systems, such as calculators, digital clocks, watches, and microprocessors.

Application Field

CD74HC4024MT is predictive in many application fields. It can be used in digital control systems, military systems, communications, telecommunications, process control, and automation. It can also be used in mechanical and electrical control systems, medical instruments, mobile communication base stations, industrial monitoring and control systems, hardware and software systems, etc. The CD74HC4024MT can also be used in data acquisition systems, i.e. input/output (I/O) boards, device drivers, analog- to-digital converters (ADCs), digital-to-analog converters (DACs), and digital signal processing circuits. In addition, the IC is used in auto-dialer, data recording-transmission, automatic ticketing machines and systems, and smart metering. Some of the primary uses of CD74HC4024MT are in frequency synthesizers, analog/digital clocks, and timers.

Working Principle

The CD74HC4024MT allows the designers to achieve high levels of performance and accuracy using fewer components. The device operates in a two wire asynchronous serial interface mode, in which the serial data is periodically sampled on both the rising and falling edges of the clock signal. The device can also be used in a 3-wire synchronous serial interface mode, in which the data is constantly monitored for transitions on all three signals. The CD74HC4024MT supports a count frequency of up to 8 MHz, or a divide-by-10 frequency of up to 4 MHz. It has a low active-low reset and 10 divide-by-two stages. Each of the four outputs can be used as a clock source, or it can be gated off using the Control Inputs. The output can also be inverted using the Control Inputs. The CD74HC4024MT can be used with a number of other devices such as dual 4-bit up/down counters, 8-bit synchronous counters, programmable dividers, decade dividers, and multi-function dividers. The device is available in a variety of packages including PDIP-14 (Plastic Dual Inline Package), DIP-20 (Dual Inline Package) , SSOP-20 (Shrink Small Outline Package), SOIC-14 (Small Outline Integrated Circuit), and TSSOP-14 (Thin Small Outline Package).

Conclusion

CD74HC4024MT is an important integrated circuit (IC) used in digital systems. It performs the tasks of a decade counter, dividing the clock frequency by a factor of ten. This IC is widely used in applications ranging from digital control and communication systems to data acquisition boards and analog/digital clocks. The device operates in two primary interface modes - 2-wire asynchronous serial interface and 3-wire synchronous serial interface. The CD74HC4024MT is available in a variety of packages including PDIP-14, DIP-20, SSOP-20, SOIC-14, and TSSOP-14.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description