CD74HC393MG4

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Logic chips are essential components of modern electronics, and CD74HC393MG4 is one of the most powerful and versatile chips available on the market. This chip is classified as a Logic - Counters, Dividers, and is designed to meet the needs of a wide range of applications. Here, we will discuss the application field of CD74HC393MG4, as well as its working principle.

Application Field of CD74HC393MG4

The CD74HC393MG4 is a dual 4-bit counter/dividers capable of counting or dividing up to 16 binary signals. It is capable of clocking at speeds up to 30MHz and is suitable for use in embedded systems. This chip integrates two 4-bit binary counters, each with its own enable, reset, and clock inputs. It is commonly used in a variety of applications, including embedded systems, automotive, aerospace, industrial, and consumer electronics.

CD74HC393MG4 can be used in applications that need to count or divide up to 16 signals. It is particularly suited for use in signal timing, event sequencing, rate multiplication, and frequency division. Additionally, the chip can be used to generate control signals in synchronization with a clock signal. The application is not limited to counter/dividers, as the chip is also capable of performing multiple tasks. With the addition of logic gates, the chip can be used to create complex logic functions such as arithmetic operations, pattern recognition, and decision making.

The chip is also used for pulse-width modulation (PWM) and servo motor control applications. PWM is used to control the speed of motors and other rotating devices, while servo motor control is used to control the movement of an actuator in predetermined directions. Additionally, the chip is used to create analog-to-digital (ADC) and digital-to-analog (DAC) conversion. The output of DAC can be used in various signal processing operations such as filtering, gain control, and signal conditioning.

Working Principle of CD74HC393MG4

The CD74HC393MG4 chip is designed using CMOS silicone on SOICs (Surface-Mounted Integrated Circuits). The chip consists of two sets of half-adders, two enables, and two clocks. The two enables control the two sets of half-adders, while the clocks are used to control the speed of the counters. The outputs of the two sets of half-adders are summed, resulting in a single 4-bit binary counter. The two enables allow either one or both sets of half-adders to be enabled at the same time, allowing a wide range of counting operations.

When the enable signal is high, the counters are enabled and begin to count. When the Enable signal is low, the counters are disabled and will not count. The clock signal is used to control the timing of the counter by providing a pulse at regular intervals. The counters count up for each clock pulse. The numbers of pulses can be controlled by adjusting the frequency of the clock.

The chip can count from 0 to 15 and is capable of counting up to 30MHz. The count rate can be changed by changing the frequency of the clock signal. The chip also has a reset input, which when applied, causes the counter to reset to 0. The counter can also be set to a particular count by applying a specific count to the set/reset inputs.

The CD74HC393MG4 is a powerful and versatile chip capable of fulfilling many counting and timing needs in modern electronics. The chip\'s high clocking speed and wide range of capabilities make it an ideal choice for applications involving signal timing, frequency division, pattern recognition, and decision making.

The specific data is subject to PDF, and the above content is for reference