CD74HCT390MT

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The CD74HCT390MT is a monolithic high-speed CMOS dual 4-bit ripple counter and dual 4-bit decimal counter. It is a high-speed, high-performance device with logic circuitry to count “0” and “1” pulses. Inputs to the device may be utilized for counting of either two-phase or three-phase clock pulses. The ripple counter has two 4-bit binary count outputs (Qa – Qd) and the decimal counter has two 4-bit BCD count outputs (Qa-Qd).

The CD74HCT390MT is commonly used in logic circuit applications and is also frequently used in various robotic functions. It can be used in applications such as frequency dividers, timing circuits, voltage-controlled oscillators and PWM (pulse-width modulation) controllers. The device is widely used in industrial and consumer automation, including robotics, machine-loading, vending and railway signaling systems.

The logic circuitry in the CD74HCT390MT is based on a four-bit binary ripple counter and a four-bit BCD counter. The counters are programmable through two inputs, A and B. The state of the counter is determined by the A and B inputs and the state of the clear input. The device can be programmed to count up, down, or both. When the A and B inputs are at logic “1”, the ripple counter is reset and the BCD counter is cleared. When the A and B inputs are at logic “0”, the ripple counter counts up and the BCD counter counts down.

The CD74HCT390MT has two separate 4-bit ripple counters and two 4-bit BCD counters. Each counter has its own four-bit output that can be used to drive other logic circuits. The ripple counter outputs are labeled as Q0-Q3 and the BCD counter outputs are labeled as Q0-Q3. The counters can be used independently of each other to provide four-bit outputs or they can be used together to provide eight-bit outputs. For example, the A and B inputs can be used to provide either a four-bit binary count or a four-bit BCD count. The clear input can be used to preset the counter value or to reset the counter.

The counters in the CD74HCT390MT can be used for a variety of applications. It can be used to divide frequencies down to obtain a range of different frequencies from the same input clock. It can also be used in timing and calibration applications. In addition, it can be used in voltage-controlled oscillators, counters and PWM controllers. It can also be used to measure the frequency of a signal and to generate waveforms with a specified phase and frequency.

Overall, the CD74HCT390MT is a versatile device that is well suited for a wide variety of logic circuit applications. Its ability to provide two independent ripple counters and two separate 4-bit BCD counters make it an ideal choice for frequency division, timing, voltage-controlled oscillators, counters and PWM controllers. Its ability to be preset or reset makes it an ideal choice for a variety of logic circuit applications.

The specific data is subject to PDF, and the above content is for reference