CDBB3200-HF

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The CDBB3200-HF is an advanced steel-encapsulated, ultra-fast recovery rectifier, widely utilized in many industries. It has been designed with higher reliability and temperature operating tend to meet the needs of a variety of industrial applications. The CDBB3200-HF can be used as a part of power supply circuit, converter and inverter. Furthermore, it also has the capability to reduce noise for a better signal-to-noise ratio.

The primary application field of the CDBB3200-HF is rectifying AC power into DC power. It is suitable for both low and high power-output circuits. In the single-phase bridge rectifier, the CDBB3200-HF can be connected in the manner of two positive and two negative terminals. The four terminals are connected, respectively, to the positive, negative, and two AC inputs. When it is used in a full-wave bridge rectifier, it is also connected in a similar manner.

The working principle behind the device is also quite straightforward. The CDBB3200-HF components have an anode, cathode and Gate Lead. When voltage is applied to the anode and cathode, the electrons flow from the anode to the cathode. The current flow will cause the voltage across the two semiconductors to rise until the barrier is broken. This phenomenon creates a current that is then applied to the Gate Lead which controls the device. As long as the voltage across the two components remains below the maximum value of the voltage needed to break the barrier, the device will remain on.

The unique combination of advanced construction and design enables the CDBB3200-HF to have a wide range of applications. For example, it can be used as part of an uninterruptible power supply system, to provide conditioned power to an isolated region and to protect against power fluctuations. Furthermore, it can also be used as a step-down/step-up voltage regulator, and even as a motor starter. Additionally, the CDBB3200-HF can be used to protect sensitive components in industrial settings.

In summary, the CDBB3200-HF is a steel-encapsulated, ultra-fast recovery rectifier, designed for high reliability and temperature endurance. It is suitable for many industrial applications, such as uninterruptible power supply systems, voltage regulators, and motor starters. The working principle of the device is relatively simple; when provided with an anode, cathode and Gate Lead current, it can be used to provide power conditioning and regulation.

The specific data is subject to PDF, and the above content is for reference