CGRA4002-G

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Overview of CGRA4002-G Application Field and Working Principle

The CGRA4002-G is a single diode rectifier, commonly known as a power rectifier. It is used in electrical circuits that require a device to convert alternating current (AC) to direct current (DC). Typically, power rectifiers are used in applications where the power needs to be regulated or filtered. Some of these applications include power supply units, solar panel installations, and rectifier circuits.

Features of CGRA4002-G

The CGRA4002-G has a reverse current capacity of 400 amperes and is capable of withstanding 40 volts of reverse voltage. Its maximum power dissipation is 2 Watts and the forward voltage drop is 2 volts. The CGRA4002-G is rated for 35 amps of peak forward current and is available in packages with 4 terminals.

Working Principle of CGRA4002-G

The CGRA4002-G is a single diode rectifier, which means that it consists of a simple diode p-n junction, like any other power diode. In a single diode rectifier circuit, AC power is applied to the diode. As current flows through the diode, the changing voltage of the AC input causes the diode to alternately forward bias and reverse bias, resulting in a type of rectified DC output. The forward bias occurs when the p-type and n-type semiconductors in the diode are connected in the same direction, allowing current to flow through the diode. The reverse bias occurs when the two semiconductors are connected in opposite directions, blocking current from flowing through the diode.

The CGRA4002-G uses a reverse recovery time of 6 nanoseconds. During this time, which occurs just as the device switches from the forward bias to the reverse bias, a small amount of energy is stored in the junction, which is then released as a surge current. This surge current must be limited to ensure that the device doesn’t overheat.

Applications of CGRA4002-G

The CGRA4002-G is used in a variety of applications including, automotive, aerospace, and industrial power supplies. It is also used in power supply circuits in computers, telecommunications systems, and solar array installations. In addition, the CGRA4002-G can be used for filtering DC power, in order to reduce noise and protect against voltage spikes or surges.

In automotive applications, it is often used in ignition systems, where the CGRA4002-G rectifies the AC signal from the distributor to produce the DC voltage required to power the spark plugs. In aerospace applications, it can be used to convert the AC power generated by turbine engines into the DC power needed to power various aircraft electrical systems.

Conclusion

The CGRA4002-G is a single diode rectifier designed for use in a wide variety of power related applications. Its low forward voltage drop, high reverse current capacity and fast switching time allow it to provide a reliable and efficient source of power. With its small size and high power dissipation, the CGRA4002-G is an ideal solution for a number of power supply applications.

The specific data is subject to PDF, and the above content is for reference