CKRD2410P

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Solid State Relays (SSRs) are electronic control-circuit devices used to control electric circuits. They are designed to control the on and off switching of power circuits, thus enabling a user to control which devices receive power and when. The CKRD2410P is a single-phase solid state relay, designed to control single-phase electrical current up to 10A.

In regards to the structure of the CKRD2410P, it consists of an optoelectronic isolator, a static control unit, and a static drive component. The optoelectronic isolator, commonly known as an opto-isolator, is a device which transmits signals between circuits, whilst keeping them electrically segregated. It does this by using light– generated by an LED or phot Diode – to send a signal, which is then received by a photocell or phototransistor.

The static control unit is the most important component in a solid state relay, and in the CKRD2410P it consists of an optoelectronic isolator, a capacitance discharge system, a static trigger switch and a detecting circuit. The optoelectronic isolator works in the same way as discussed previously. The capacitance discharge system is a circuit which works to ensure that the CKRD2410P relay is not affected by high current flow. The static trigger switch is used to detect the on and off status of the electric circuit, while the detecting circuit is used to determine whether there is a voltage or current flowing through the circuit.

The final component of the CKRD2410P is its static drive unit. This unit consists of an SCR (Silicon Controlled Rectifier) and a PNP transistor. The SCR works to open and close the circuit when the relay is turned on and off, while the PNP transistor is used to drive the SCR.

The principle of operation of the CKRD2410P is fairly straightforward. When a voltage or current is applied to the terminal pins of the device, the optoelectronic isolator sends a signal to the static control unit. The static control unit then sends a signal to the static drive unit, which in turn activates the SCR to open or close the circuit, depending on the status of the electric current.

The CKRD2410P\'s application field is quite broad. It can be used to open and close electrical circuits remotely, switch on or off large power appliances, and control lighting and heating systems. It is also suitable for use in various automation systems, such as access control, security, production line control, and temperature control.

To conclude, the CKRD2410P is a single-phase solid state relay designed to control single-phase electrical current up to 10A. It consists of an optoelectronic isolator, a static control unit, and a static drive component. Its principle of operation is based on the optoelectronic isolator sending a signal to the static control unit, which then activates the SCR of the static drive unit to open or close the circuit. With a broad applicability, the CKRD2410P is a popular choice for various automation systems, from access control to temperature control.

The specific data is subject to PDF, and the above content is for reference