CKRD6010

Series:	CKR60
Packaging:	Bulk
Part Status:	Active
Mounting Type:	DIN Rail
Circuit:	SPST-NO (1 Form A)
Output Type:	AC, Zero Cross
Voltage - Input:	4 ~ 32VDC
Voltage - Load:	48V ~ 660V
Load Current:	10A
Termination Style:	Screw Terminal
Package / Case:	SSR with Integrated Heat Sink
Supplier Device Package:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Solid State Relays

A Solid State Relay (SSR) is an electronic switching device that can be used to turn on and off an electrical circuit using an electrical signal. The CKRD6010 SSR is a particular type of solid state relay and it is used in a variety of applications, such as industrial automation, robotics, and process control systems. The CKRD6010 SSR is designed for use as a logic-level interface between a controller and a device. It can be used for either on-off or proportional control. The relay requires a DC supply voltage of either 5-12 volts or 14-36 volts depending on which version of the device is used.The CKRD6010 is an optically coupled, bi-polar, four-terminal solid state relay with an LED driver and a photovoltaic output diode for switching an output load. The device is designed to provide isolated control between two independent circuits. It has an Isolation Resistance of >1000 Mohm, a Dielectric Strength of >2.5KVrms, and an Operating Temperature between -40°C to 125°C.The CKRD6010 utilizes a four-terminal configuration and is typically connected to a controller on one side and to the target device on the other side. This four-terminal configuration provides three terminals for power, one for the control signal and, two for the load. The power terminals are connected to the DC power supply and the two load terminals are connected to the target device that is being switched. The control terminal is connected to the control signal and it controls the switching of the SSR.The working principle of the CKRD6010 SSR is based on the logic level interface. When the voltage at the control terminal is greater than the threshold voltage, the LED is turned “on” which then switches the connected output load “on” and vice versa. The LED and the output load are isolated from each other by the optically coupled optocoupler which provides 4KV of isolation.The CKRD6010 SSR is used in many applications such as motor control, process control, alarm systems, energy management and industrial automation. It is particularly suitable for applications where a high degree of isolation is needed between the control system and the load, and also in environments with high levels of electrical noise or vibration.The CKRD6010 SSR is also ideal for applications where a low cost and low power solution is needed. The device is capable of switching a variety of loads such as DC motors, power metal film resistors, triacs, and SCRs. The CKRD6010 SSR is a reliable and cost-effective solution for a variety of applications. With its high degree of isolation, low power requirements and low cost, the CKRD6010 SSR is an ideal choice for many applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description