CKRD2430P

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Solid state relays are increasingly popular for applications where traditional electromechanical relays are less feasible. An example of a solid state relay is CKRD2430P. It builds upon the traditional SPDT contact relay structures developed over decades, but with solid state components instead of contacts. The primary application of this solid state relay is in the area of power-electric field control.

To explain the working principle of the CKRD2430P, it is best to divide it into its two components: a logic input section and an output section.

The logic input section is where the relay receives a control signal from a logic controller. This input signal is converted into an equivalent voltage specified by the manufacturer. The voltage is then regulated by the internal circuitry of the solid state relay and applied to the drive terminal.

The output section is the section that actually control the output. It has two relays separated by the main static contactor. When an input is applied to the logic input section, a coil is activated and an armature in the center of the static contactor is energized. This energization leads to the closing of a normally open contact and the opening of a normally closed contact. The normally open contact is then connected to the output terminal, and the normally closed contact is disconnected from the output terminal.

This allows current to flow to the output terminal when an input is applied. The CKRD2430P also has a manual switch that can be used to activate the solid state relay in the absence of an input.

The CKRD2430P can be used in a variety of applications including motorized actuators and domestic appliances. It is particularly useful in applications requiring long life, robust performance, low EMI emissions, and no special ventilation or insulation.

In summary, the CKRD2430P solid state relay is a fast, reliable, and long-lasting device. Its two-relay structure allows it to control current to an output terminal by receiving a control signal from a logic controller. It is especially useful in applications that require minimal maintenance and long life.

The specific data is subject to PDF, and the above content is for reference