CM7560R-126

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Common Mode Chokes are electrical components that uses inductance to limit the conductive interference between two circuits or parts of a circuit. This type of electrical noise, which is often referred to as Common Mode (CM) noise, is usually caused by the capacitative or inductive coupling of external signals in the power or data lines. Common Mode Chokes are commonly used to reduce these types of noise levels. The CM7560R-126 is a particular type of such device that is specifically designed for impedance plane signals.

The CM7560R-126 is a low-pass Common Mode filter which is designed to filter out common-mode signals at a frequency range of 10kHz to 500MHz. It is composed of an oscillator and a voltage controlled oscillator (VCO) connected in tandem. In this configuration, the inductance of the chokes helps to separate the signals into two separate output paths. In addition, the VCO is used to attenuate the common-mode signals by converting their amplitude and frequency from one signal to another.

The CM7560R-126 application field covers the list of different signal applications type like HD-SDI, SDI, 4K UPC, Fiber optic for telecom and video signal, all kinds of broadband applications, satellite communication, CATV signal, RF industry, medical, audio and video equipment etc. Generally, Common Mode Chokes are used to improve the system performance by reducing interference, such as power line noise, crosstalk, radio frequency interference, optical noises, and so on.

The working principle of CM7560R-126 is based on two different circuits, one of which is a crossover circuit. The crossover is used to divide the incoming signal into two separate output paths. The first output path is for the high-pass filter, while the second path is for the low-pass filter. The low-pass filter is used to attenuate the signal, while the high-pass filter is used to pass the signal with the required frequency. In addition, the VCO is used to further reduce the unwanted noise. The VCO is also used to modulate the signal in order to reduce the signal degradation caused by the crossover circuit.

The CM7560R-126 also includes a voltage-controlled output transistor (VCO) which can attenuate both DC and AC noise. VCOs are commonly used to reduce the amount of noise when transmitting signals over long distances by providing a clean signal path. VCOs can also be used to reduce the amount of noise introduced by external sources, such as power lines and other electronic noise sources.

Common Mode Chokes are invaluable tools for reducing interference and noise in a wide variety of applications. The CM7560R-126, in particular, is a excellent choice for its low-pass and VCO capabilities. The crossover circuit helps to separate the signal into two different output paths, while the VCO helps to attenuate the noise introduced by external sources. This type of Common Mode Choke has a wide variety of applications, including HD-SDI, CATV, medical, audio, and video equipment.

The specific data is subject to PDF, and the above content is for reference