CP305-2N3019-CT20

Series:	--
Packaging:	Tray
Part Status:	Active
Transistor Type:	NPN
Current - Collector (Ic) (Max):	1A
Voltage - Collector Emitter Breakdown (Max):	80V
Vce Saturation (Max) @ Ib, Ic:	500mV @ 50mA, 500mA
Current - Collector Cutoff (Max):	10nA (ICBO)
DC Current Gain (hFE) (Min) @ Ic, Vce:	100 @ 150mA, 10V
Frequency - Transition:	100MHz
Operating Temperature:	-65°C ~ 150°C (TJ)
Mounting Type:	Surface Mount
Package / Case:	Die
Supplier Device Package:	Die

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

CP305-2N3019-CT20 is a common device in the transistors family, which falls under the category of bipolar junction transistors (BJTs). It is one of the most commonly used transistors, as it is cost-effective and also has excellent performance. As such, it is widely used in various applications such as amplifiers, detectors, switches and time delay circuits. In the sections below, we will give an overview of the most important features of the CP305-2N3019-CT20, including its application field and working principles.

Application Field

The CP305-2N3019-CT20 is widely used in many applications. As a electronic component, it can be employed as an amplifier, detector, switch and time delay circuit, among other uses. It can be used as an amplifier in both analog and digital circuits. It works by amplifying small voltage signals that are too weak to be effectively processed by other circuit components. As an amplifier, it can be used to provide a amplified version of an audio signal, which then can be routed through a speaker, or to boost a voltage signal before it is passed on to an electronic component that requires a higher voltage. The CP305-2N3019-CT20 can also be used as a switch. It can be employed to either route or block signals in a digital circuit. When used as a switch, it is connected such that a certain level of voltage is applied in order to turn the switch on or off. Finally, the CP305-2N3019-CT20 can be used as a time delay circuit. This function is useful in applications that require a certain delay before an event is triggered. This can be useful in applications such as battery management, where there might need to be a certain delay before a certain event is triggered.

Working Principle

The CP305-2N3019-CT20 is a three-party bipolar junction transistor that uses three terminals – the collector, base, and emitter. When the voltage, either applied to the base or the collector, increases beyond a specific voltage, the device starts conducting, allowing current to pass from one terminal to another. This same principle is used to either block or route signals in digital circuits. The device also has the ability to amplify low or zero signal levels into higher output levels. This is achieved by amplifying the weak signal coming from the base while keeping the output signals stable.

Conclusion

In conclusion, the CP305-2N3019-CT20 is one of the most common devices available in the transistors family, as it is cost-effective and also has excellent performance. Furthermore, it can be used as an amplifier, detector, switch, and time delay circuit, among other uses. Its working principles involve the use of three terminals – the collector, base, and emitter – and its ability to amplify low or zero signal levels into higher output levels.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description