CPC1778J

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Solid State Relays, also known as electronic relays or solid state contactors, are the electrical equivalent of mechanical relay contacts. In contrast to a mechanical relay, which made an audible "click" when engaging or disengaging, the solid state relay is completely silent. They are low cost, usually very reliable, have long life expectancy and are unaffected by contact bounce. Despite these advantages, solid state relays have several relatively minor disadvantages.

At the heart of the solid state relay is the CPC1778J, a relay contactless device specified to provide galvanic isolation between input and output circuits. This device is a four quadrant gate transistor alternating current (AC) zero crossing detection technique. The current and voltage of the output load and heatsink can be isolated from the control circuit by the galvanic isolation barrier.

The basic working principle of the CPC1778J is as follows: an opto-isolator converts the input current to a low voltage at the signal level, which is then applied to the control circuit. The control circuit is then used to detect the zero-crossing point of the output current phase, timing the exact switch-on, switch-off point of the output load current by controlling the output transistor, thus completing the AC switch action.

There are several applications for the CPC1778J, including: Load switching in air conditioners, lighting control,air conditioning mode switching, temperature and humidity control, motor speed and torque control, solid state amplifier control, HVAC applications, lighting/fan control, and electric heating/thermostat control.

It should be noted that the CPC1778J is a single-phase device and should not be used in three-phase systems. In addition, it should be noted that this device will not operate under a steady-state condition, so any application should be designed to ensure that the load is cycled regularly to re-energize the CPC1778J. Furthermore, special care must be taken to ensure that the circuit is correctly connected by following the manufacturer’s wiring instructions.

In conclusion, CPC1778J double-acting, no-contact AC solid state relays provide reliable switch control with low operational on and off times and high cycle life. This device offers flexibility in applications where precision, safety, and reliability are demanded while providing isolation between the input and the output, and it also can be used in a variety of applications.

The specific data is subject to PDF, and the above content is for reference