CTB06-1200CW

Series:	--
Packaging:	Bulk
Part Status:	Obsolete
Triac Type:	Alternistor - Snubberless
Voltage - Off State:	1.2kV
Current - On State (It (RMS)) (Max):	6A
Voltage - Gate Trigger (Vgt) (Max):	1.3V
Current - Non Rep. Surge 50, 60Hz (Itsm):	60A, 63A
Current - Gate Trigger (Igt) (Max):	35mA
Current - Hold (Ih) (Max):	35mA
Configuration:	Single
Operating Temperature:	-40°C ~ 125°C (TJ)
Mounting Type:	Through Hole
Package / Case:	TO-220-3
Supplier Device Package:	TO-220AB

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction
Thyristors - TRIACs are a relatively new type of semiconductor device. They are very similar to transistors in many ways, but have a different operating mechanism. They are also known as “power transistors” and are used to regulate power in different applications.CTB06-1200CW is a type of Thyristors, which combines different features of various Thyristors in one. Its application field and working principle need to be discussed in detail.

Application field
CTB06-1200CW Thyristors have a wide range of applications. They are mainly used in high power switching, heating and lighting control systems, motor control, power factor correction, and other industrial applications. Specifically, they can be used as a rectifier for AC-DC power conversion, for power control and for power Limiting. In addition, CTB06-1200CW Thyristors can also be used in rectifiers for DC-AC power conversion and for frequency and line regulation.

Working principle
CTB06-1200CW Thyristors are four layer semiconductor devices. They are composed of two PN junctions separated by a P-type material with a gate connected to the P-type material. The two PN junctions form a thyristor which is a current controlled device. When a positive voltage is applied to the anode and a negative voltage to the cathode, no current flows between the two. However, when a small current is applied to the gate electrode, an avalanche breakdown occurs in the thyristor, causing a large current to flow between the anode and the cathode. This is the basic principle of thyristor technology.

Gate Triggering
CTB06-1200CW Thyristors can be triggered in both forward and reverse gate logic. In forward gate logic, the gate current needs to be positive, while in reverse gate logic, it needs to be negative. It is important to note that the current should never exceed the maximum specified by the manufacturer. In order for the thyristor to turn on, the gate must receive the correct amount of current. The amount of current that needs to be supplied depends on the device triggering voltage, which is usually given by the manufacturer. When the gate current is greater than the device triggering voltage, the thyristor will turn on and current will flow between the anode and the cathode.

Latching
CTB06-1200CW Thyristors have a latching characteristic which means that once the trigger current is applied and the thyristor is turned on, it will remain on until the current is removed. This is because when the thyristor is turned on, the current flowing through it creates a magnetic field which traps the charges and maintains a current path between the anode and the cathode even after the trigger current is removed. By being able to latch, or maintain a steady current, CTB06-1200CW Thyristors are suitable for applications such as heating and lighting control, motor control, and power factor correction.

Power Limiting and Controlling
CTB06-1200CW Thyristors are also suitable for power limiting and controlling. This is because they can be programmed to limit the amount of current that flows through the device at any given time. This can help prevent overloads in electrical systems and protect sensitive components from damage. At the same time, CTB06-1200CW Thyristors can also be used to control the power flow in an AC circuit. By controlling the amount of power that flows, they can be used to ensure that the desired amount of power is received.

Conclusion
In conclusion, CTB06-1200CW Thyristors have a wide range of applications and can be used for power limiting and controlling, rectifiers for AC-DC and DC-AC power conversion, and frequency and line regulation. They are a reliable and cost-effective choice for many industrial applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description