CTB06-1200SWPT

Series:	--
Packaging:	Bulk
Part Status:	Obsolete
Triac Type:	Logic - Sensitive Gate
Voltage - Off State:	1.2kV
Current - On State (It (RMS)) (Max):	6A
Voltage - Gate Trigger (Vgt) (Max):	1.3V
Current - Non Rep. Surge 50, 60Hz (Itsm):	60A, 63A
Current - Gate Trigger (Igt) (Max):	10mA
Current - Hold (Ih) (Max):	15mA
Configuration:	Single
Operating Temperature:	-40°C ~ 125°C (TJ)
Mounting Type:	Through Hole
Package / Case:	TO-220-3
Supplier Device Package:	TO-220AB

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

Thyristors are a type of solid-state device that can control large amounts of electric current, and they\'re used in a variety of applications ranging from industrial automation to consumer electronics. The CTB06-1200SWPT is a type of thyristor specifically designed for use in AC power control applications. The device is a two-quadrant switch mode thyristor module that can be used to switch power to a load from an AC mains supply, thereby controlling the flow of electric current. In this article, we\'ll discuss the application field and working principle of the CTB06-1200SWPT.

Application Field for the CTB06-1200SWPT

The CTB06-1200SWPT was designed for a variety of AC power control applications and can be used in a wide range of situations. The device can be used in applications such as motor control (battery-powered vehicle starter motor, 1-phase AC induction motors), lighting and dimmers, HVAC system control, and solar energy applications. The device is also suitable for use in industrial automation, including robotic arms, automatic door opening and closing systems, and flow control.

Working Principle of the CTB06-1200SWPT

The CTB06-1200SWPT is a two-quadrant switch mode thyristor module that can be used to switch power to a load from an AC mains supply, thereby controlling the flow of electric current. The device works by sensing the zero-crossing point of the AC line and then quickly switching on and off to allow the desired amount of AC current to flow through the load. The duration of the switching on and off is determined by the input voltage and the device\'s internal circuitry. This allows for the control of the current and for the creation of a variety of effects, such as dimming or pulsing of light sources.The device is designed to operate in two modes: one-cycle control and two-cycle control. In one-cycle control, the device can be used to switch power on or off a load at the start of each half-cycle of the AC supply, allowing for fast power switching. In two-cycle control, the device can be used to switch power on or off a load at the start of each full-cycle of the AC supply, allowing for slower switching, which is useful for dimming applications.

Conclusion

The CTB06-1200SWPT is a type of thyristor module specifically designed for AC power control applications. The device is capable of controlling the flow of electric current by sensing the zero-crossing point of the AC line and then quickly switching on and off to allow the desired amount of AC current to flow through the load. The device can be used in a wide range of applications, such as motor control, lighting and dimmers, HVAC system control, and solar energy applications, and it is also suitable for use in industrial automation.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description