CY74FCT2543CTQCT

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The CY74FCT2543CTQCT is a high-speed low-skew CMOS Octal Buffer/Line Driver. It provides both low-power nonskew buffering, and high-performance high-speed data transmission. This high performance character makes it especially useful for applications such as high-speed bus interconnection and clock distribution on extremely dense module or board assemblies. It is also suitable for applications where low cost and high speed are required together.

This device is available in the following packages: SOIC, TSSOP, QSOP and LQFP. The CY74FCT2543CTQCT has a supply voltage ranging from +3.3 to +5V, 2W control capability, supports both the TTL and CMOS levels, and has an output drive capability of up to 24mA (sourcing) and 8mA (sinking). It has a propagation delay of 5ns, a maximum total output skew of 0.15ns and is capable of running at frequencies up to 200MHz.

In terms of application field, the CY74FCT2543CTQCT is mainly used to drive high speed buses and interface with various other devices, while working as a buffer between them. It can also be used to drive LCD panel bus/data lines, data bus/address buses in embedded system or system memory bus.Because of its high frequency capability and low noise, one popular application of the CY74FCT2543CTQCT is in the area of data transfer and manipulation, particularly the rapid flip-flop of large chunks of data.

To provide an overview of the CY74FCT2543CTQCT’s working principle requires focusing on the complementary circuits. Complementary circuits consist of two different active devices, shown as PMOS (positive-channel P-type MOSFET) and NMOS (negative-channel N-type MOSFET) that are used in combination to create logic elements. A complimentary circuit can be used to create any type of logic, such as multiplexer, gates, latches, registers, etc. A PMOS device between two power supply lines (Vdd and Vss) will be off when one of the two power supply lines is on, and vice versa; an NMOS device between two power supply lines will be on when one of the two power supply lines is on, and vice versa.

The CY74FCT2543CTQCT is equipped with Schmitt trigger circuits on its inputs. As the name implies, Schmitt trigger circuits are used to switch between two logic levels with different sensitivities.The differences in levels mean that the Schmitt trigger circuit is capable of accepting different input thresholds, making it easier to detect digital signals over wide dynamic range. In addition, the Schmitt triggers provide some noise immunity, by hysteresis, which is invaluable in any digital application.

The CY74FCT2543CTQCT operates over a universal supply voltage, making it suitable for applications with mixed voltage logic levels. The on-chip termination resistors ensure that when the device is switching logic levels, the outputs will not be in a “floating state”, reducing any electric noise generation.

In summary, the CY74FCT2543CTQCT is a versatile and affordable device that can be used in a variety of high-speed applications. Its low-skew and Schmitt trigger inputs make it especially useful for high-speed data transfer, while its TTL and CMOS compatibility allows it to interface with a wide range of other devices. The on-chip termination resistors further help to reduce noise, making the CY74FCT2543CTQCT an ideal choice for applications requiring both speed and noise immunity.

The specific data is subject to PDF, and the above content is for reference