CY7B991-5JC

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The CY7B991-5JC is an IC operating as a clock buffer. It is used for engineering a PCB for high-speed applications by providing a reliable clock source. This chip can buffer and fan out a clock signal with very minimal degradation. It is also used in driving ADSL transmission cards, USB ports, and DSL modems. The CY7B991-5JC features internal loop timing and skew curves which are very close to the ideal. It is a low power solution suitable for many applications such as point-to-point communications and system boot-up stability.

The CY7B991-5JC can buffer and fan out a clock signal with a maximum frequency of 266MHz, a minimum frequency of 20KHz, and a de-skew range of 0.35 to 0.45ns. It can be used to drive multiple FPGAs, SERDES interfaces, and ASICs with an accuracy of 0.5 ns. This chip is also suitable for single-ended clock applications such as DDR/DDR2 memories because of its drive capability and integral loop timing curve.

The CY7B991-5JC is very suitable for engineering boards utilizing high-speed components such as memory, FPGA, and processor devices. It has a wide fan-out capability, allowing it to drive multiple devices without suffering significant signal quality impact. This IC gives good performance in high-speed and high-skew applications due to its highly accurate and stable loop timing curve and de-skew capability.

The working principle of the CY7B991-5JC is as follows. It first receives a signal from one of its two input clocks, CLK_A and CLK_B. These clocks are then equalized and de-skewed to account for signal path delay differences present in the onboard components. The equalized signal is then sent to the fan output buffers which drive the system components. This provides a steady and reliable clock signal, with minimized latency and reduced jitter.

The typical applications of the CY7B991-5JC include timing engineering in high-speed processors, FPGA and ASIC devices, LTE and HSPA base transceiver stations, wireless point-to-point and radio systems, Ethernet base station applications, and digital video broadcasting. This clock buffer is also suitable for synchronization and timing applications such as phase locking, clock generation, and data recovery.

The CY7B991-5JC is a highly reliable, high-performance clock buffer designed for use in high-speed, high-skew applications. It can transmit signals with very minimal degradation and provide stable loop timing curves and de-skew capabilities. It is suitable for driving multiple FPGAs, SERDES interfaces, ASICs, memories and other system components. This IC can efficiently buffer and fan out a clock signal with frequencies ranging from 20KHz to 266MHz, making it suitable for a wide range of ever-changing applications.

The specific data is subject to PDF, and the above content is for reference