DEMO1985MC34940E

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The DEMO1985 MC34940E Evaluation Board is intended to facilitate the use of the MC34940E Sensor Unit. This evaluation board works to simplify the complex design and setup of various sensing systems using the MC34940E unit. It is a cost-effective solution for testing and debugging various sensor applications. The DEMO1985 MC34940E Evaluation Board is a versatile tool for a wide range of applications and is fully supported by software.

The DEMO1985 MC34940E Evaluation Board is designed to provide two separate sensing systems. The first sensing system uses an accelerometer, which measures dynamic acceleration. The sample rate of the accelerometer is selectable under software control. The other system uses resistive and capacitive touch switches, which when actuated cause different electrical conditions to be present for different resistances within the sensing area. Both sensing systems are interfaced directly to the 32 bit internal controller using its 32 kHz SPI/I²C bus.

The MC34940E evaluation board can be used for a variety of different sensing applications. It is useful in designing and testing touchscreens, multi-touch sensing, proximity sensing, motion sensing, 3D sensing, and object detection and recognition. This versatile tool can be used to detect simple tap inputs, mouse clicks, or swipe gestures. It can also measure basic acceleration information such as tilt, or provide effective tracking and gesture control.

The MC34940E evaluation board makes this task simple by integrating several components into one convenient package. To control the different sensing components, it includes an LCD and a 4x4 keypad. It supports multiple sensor technologies such as capacitive touch, resistive touch, pressure, ambient light, and acceleration. Additionally, it also provides an interface to a 5V power supply.

To allow software control of the component, the MC34940E evaluation board includes a 32-bit microcontroller with 8KB of internal Flash memory. The firmware for the microcontroller is flash-programmable, thus enabling software development laboratories to prototype a range of sensing applications using the board. It is powered by either an RS485 connection to an external device, or it can be powered with a USB port. It also includes an integrated programmable logic (PL) chip pre-programmed with the sensing application.

The MC34940E Evaluation Board simplifies the design, implementation, and integration of complex sensing systems. It is a cost effective solution for evaluating and debugging sensing systems in a laboratory environment. It is also readily available in mass-produced versions from leading manufacturers. It is an ideal tool for designing and testing a wide range of sensing applications.

The specific data is subject to PDF, and the above content is for reference