DG413HSDJ-E3

Switch Time (Ton, Toff) (Max):	105ns, 80ns
Base Part Number:	DG413
Supplier Device Package:	16-DIP
Package / Case:	16-DIP (0.300", 7.62mm)
Operating Temperature:	-40°C ~ 85°C (TA)
Crosstalk:	-88dB @ 1MHz
Current - Leakage (IS(off)) (Max):	250pA
Channel Capacitance (CS(off), CD(off)):	12pF, 12pF
Charge Injection:	22pC
-3db Bandwidth:	--
Series:	--
Voltage - Supply, Dual (V±):	±5 V ~ 20 V
Voltage - Supply, Single (V+):	12V
Channel-to-Channel Matching (ΔRon):	--
On-State Resistance (Max):	35 Ohm
Number of Circuits:	4
Multiplexer/Demultiplexer Circuit:	1:1
Switch Circuit:	SPST - NO/NC
Part Status:	Active
Packaging:	Tube

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction: The DG413HSDJ-E3 is a low-voltage, single-pole, double-throw (SPDT) analog switch part of the DG413 family of devices offered by ON Semiconductor. This device is based on nmos technology and offers an extremely low resistance of 0.75 Ω when conducting. The DG413HSDJ-E3 is capable of switching signals with very low distortion and has a low RON of up to 0.4Ω.Application Field: The main application for the DG413HSDJ-E3 is in switched capacitor and switched resistor applications, where its low resistance and low distortion make it a great choice. It can also be used for analog switching in audio applications and power supply sequencing. For these applications, the DG413HSDJ-E3 can provide low distortion, low noise, and low power consumption. In addition, the DG413 family has integrated protection circuitry that can prevent damage to other components by blocking unwanted signals. As a result, the DG413HSDJ-E3 can be used in hot swap applications, such as those found in portable electronics, where it can protect a circuit from damage caused by accidental disconnections.Working Principle: The working principle of the DG413HSDJ-E3 is based on an SPDT (Single Pole Double Throw) switch that is actuated by a CMOS (complementary metal-oxide-semiconductor) transistor. The switch has two output paths and one control path. When the transistor is on, current will flow from the control port, through the transistor, and out to either one of the output ports, depending on the status of the control port. When the transistor is off, no current will flow through the DG413HSDJ-E3, and both output ports will be connected.The DG413HSDJ-E3 provides good isolation between the control and output ports, and has a high input impedance that allows for low power dissipation at low switching frequencies. The low RON ensures that when the switch is on, it will provide a distortion-free signal, making it great for audio applications.Finally, the DG413HSDJ-E3 can be electrically reset and connected to a logic gate if desired, which makes it easy to automate control within a system.Conclusion: The DG413HSDJ-E3 from ON Semiconductor is a low-voltage, single-pole, double-throw (SPDT) analog switch that is ideal for analog signal switching in audio applications and power supply sequencing. The low resistance and low distortion make it a great choice for these applications. Protection circuitry within the device can prevent damage to components by blocking unwanted signals, and electrical reset and logic gate connections make it easy to automate the switch.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description