DG411MY/PR

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Interface - Analog Switches, Multiplexers, Demultiplexers - DG411MY/PR application field and working principle is the study of selecting between multiple electric signals via a process of “switching” or “multiplexing.” In the world of communications, data, audio and video signals, analog switches and multiplexers provide the means to send, receive or even process signals in one system and then “transfer” them to another device.

Digital-to-analog converters (DACs) and analog-to-digital converters (ADCs) allow computers and other digital systems to interface with analog systems, such as TV and radio broadcasts, allowing the digital system to understand and generate the signals required for that particular system.

The DG411MY/PR is a quad single-pole, single-throw (SPST) analog switch designed for single supply operation from a +3.3 V to +30 V supply. It features low break-before-make switching action, low on-state resistance, and TTL/CMOS compatibility.

The DG411MY/PR contains four SPST switches, each switch allowing a signal on its common terminal (COM) to be routed to its normally open terminal (NO) or ground. The DG411MY/PR includes input protection that exceeds the HBM ESD requirements of the JESD22-A114-B standard and the throughput inherent of the device can be independent of the power supply voltage.

The working principle of the DG411MY/PR is based on analog switching—the process of selecting between multiple electric signals via a process of “switching” or “multiplexing.” A multiplexer is a device that, by design, allows signals to be switched between different paths. The DG411MY/PR can act as a multiplexer and can be used in lieu of mechanical switches in numerous applications.

The operating parameters of the DG411MY/PR are determined by the supply voltage and the source impedance of the signal. As the supply voltage increases, the input voltage range increases. Likewise, as the source impedance of the signal increases, more current will be required to drive the signal through the switch.

The DG411MY/PR can be used in a variety of systems and applications, such as audio/video equipment, communications, instrumentation and medical systems. In communications, it can be used to route low voltage signals such as RS-232 or IEEE-1394. Similarly, the switch can be used in audio/video systems to switch between multiple video sources in order to select the desired signal. It can also be used in instrumentation systems to switch input signals and output signals, such as transducers and analog circuits. In medical systems, it can be used to switch between multiple input signals and output signals in order to monitor and control vital patient information.

The DG411MY/PR is a cost-effective analog switch which provides a cost-effective and reliable solution for signal routing applications. It features low on-state resistance and an ESD rating that meets the requirements of the JESD22-A114-B standard, allowing it to be used in a variety of signal routing applications.

The specific data is subject to PDF, and the above content is for reference