DG453EY-T1-E3

Series:	--
Packaging:	Tape & Reel (TR)
Part Status:	Active
Switch Circuit:	SPST - NO/NC
Multiplexer/Demultiplexer Circuit:	1:1
Number of Circuits:	4
On-State Resistance (Max):	5.3 Ohm
Channel-to-Channel Matching (ΔRon):	120 mOhm
Voltage - Supply, Single (V+):	12V
Voltage - Supply, Dual (V±):	±5 V ~ 15 V
Switch Time (Ton, Toff) (Max):	118ns, 97ns
-3db Bandwidth:	--
Charge Injection:	22pC
Channel Capacitance (CS(off), CD(off)):	31pf, 34pF
Current - Leakage (IS(off)) (Max):	500pA
Crosstalk:	-85dB @ 1MHz
Operating Temperature:	-40°C ~ 125°C (TA)
Package / Case:	16-SOIC (0.154", 3.90mm Width)
Supplier Device Package:	16-SOIC
Base Part Number:	DG453

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Interface - Analog Switches, Multiplexers, Demultiplexers

DG453EY-T1-E3 is an analog switch, multiplexer and demultiplexer integrated circuit from National Semiconductor. It can be used as an analog switch as well as an analog multiplexer/demultiplexer. It is built using CMOS technology with a supply voltage range of 2.7V to18V, making it an ideal choice for low-voltage applications.The DG453EY-T1-E3 has an array of eight single-pole single-throw switches and an enable terminal that controls whether the switches are enabled or disabled. The eight SPDT switches can be configured in multiple ways to function as a single sixteen-position multiplexer, a dual eight-position multiplexer, or a quad four-position multiplexer. In addition, the switches can be used as a quad two-bit demultiplexer or a dual four-bit demultiplexer. Each switch is capable of operating from 0V to +Vcc and is protected from up to four devices simultaneously.The DG453EY-T1-E3 incorporates advanced CMOS technology to obtain high speed at low power. The switch is capable of operating with a maximum signal frequency of 500kHz, and can be used for high frequency switching applications. The chip also features low signal distortion characteristics, a wide dynamic range and low charge injection. It has a typical on-state resistance (Ron) of 5 ohms, off-state leakage current of 0.2uA, and a total maximum switch current of 200mA. The chip is supplied in an SO-14 package and is available in both lead-free and standard pin plating options. This circuit operates over a wide temperature range of -40°C to +85°C, making it ideal for industrial process control applications and automotive systems. This device is RoHS compliant and is ideally suited for both single chip and multiple chip solutions.In summary, the DG453EY-T1-E3 is a versatile and reliable integrated circuit from National Semiconductor. This chip can be used as either an analog switch or a multiplexer/demultiplexer and can be used for a variety of applications. It offers low power with fast switching speeds and is capable of operating over a wide temperature range. This device is an ideal choice for low-voltage applications and is RoHS compliant for use in a variety of industrial process control applications as well as automotive systems.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description