DM74LS138N

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Logic switches, multiplexers, and decoders are among the most important components in the modern digital world. One of the most popular and commonly used of these components is the DM74LS138N, a 3-to-8 line data selector/ multiplexer. This integrated circuit is widely used in various electronics systems, from simple logic designs to highly sophisticated ones. In this article, we will discuss in-depth the application field and working principle of the DM74LS138N, as well as its advantages and disadvantages.

The DM74LS138N, manufactured by Texas Instruments, is perhaps the most popular of the 3-to-8 line data selector/ multiplexers. Its application mainly lies in the selection, sampling, segregation, and routing of digital data. In addition, this IC can be used in digital logic and arithmetic computations.

The DM74LS138N is a three-input, eight-output multiplexer. It allows for the selection of any one of eight data inputs depending on the values of its three selection inputs. Each of the eight outputs is an open-collector output and it is compatible with TTL logic levels.

The DM74LS138N IC has three input lines, labeled A0, A1, and A2. These control what data output is selected. Each input line can have one of two possible logic states: 0 or 1. In order to select one particular data output, all three input lines must be set to either 0 or 1. For example, if A2 is 0 and A1 and A0 are both 1, output O3 will be selected.

The DM74LS138N has eight data input lines, labeled D0 to D7. Each of these lines can be connected to any digital logic system or circuit, from simple logic gates to complex programmable logic devices. When the proper combination of the A0, A1, and A2 inputs is selected, the data from one of the D0 to D7 lines is sent to the data output, labeled O0 to O7.

The DM74LS138N can also be used for multiplexing. Multiplexing is a process of sending several digital signals over a single line, which can save the space and cost of multiple wires. The DM74LS138N can multiplex up to eight digital signals on a single output line. The A0, A1, and A2 control inputs select which of the eight inputs will be sent over the output line.

The DM74LS138N also has a strobe input labeled E. The strobe input allows the user to control when the data is sent. When E is held at a logic 0 level, all output lines will remain deselected and there will be no data sent to the output. The strobe input can also be used to synchronize multiple multiplexers, allowing for larger data transfer rates.

Like most ICs, the DM74LS138N has its advantages and disadvantages. One advantage is that it is manufactured to resist noise, meaning that it does not easily get affected by interference from other components. It also uses little power, making it an efficient choice for many applications.

One disadvantage of the DM74LS138N is that it can only multiplex a maximum of 8 digital signals. For applications that need to multiplex more than 8 signals, multiple multiplexers can be used. However, this will result in extra cost and space requirements.

In summary, the DM74LS138N is a 3-to-8 line data selector/ multiplexer manufactured by Texas Instruments. It is used mainly in the selection, sampling, segregation, and routing of digital data. It is also used for multiplexing. While this IC does have some advantages, such as its noise resistance and low power consumption, it does have some disadvantages, such as its limited multiplexing capability.

The specific data is subject to PDF, and the above content is for reference