DS1100LU-300/T&R

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The DS1100LU-300/T&R is a versatile delay line that can be used to control a variety of signals and systems. It is an adjustable, fully programmable delay line for today's high-performance applications. It is used as a buffer between components, a delay line for audio/video signals, and a frequency divider to regulate a system clock cycle.

The DS1100LU-300/T&R is most often used in clock/timing applications where delayed signals can be controlled relative to normal electrical signals. As an adjustable delay line, it allows a system or subsystem to be tuned perfectly. This is achieved by providing user-defined interval delays (sometimes referred to as 'adjustable delays' or 'delay cycles').

The DS1100LU-3XX/T&R consists of dual-lane programmable delay lines (PDLs). Each lane consists of pure monolithic circuitry providing delay settings with accuracy to fractions of nanoseconds (ns). The delay can be set anywhere in the range of 1 ns to 31ms, in Microseconds (μs) increments. Delay line internal gate level signals handle up to 8 symbols. These symbols can be either input/output in DLL, Pulse code modulation (PCM), or Manchester coding.

The delay line is powered from a single 5V supply and works on a two-level logic. It requires an external clock for operation. Clock cycles are available from the external clock, but the average clock cycle is 1/4 of the delay cycle. The delay line also contains amplitude adjustable analog amplifier with a range of 0 to 1.5V, which is adjustable by the user.

The DS1100LU-300/T&R delay line provides a number of advanced features designed to adapt the signal processing capability of the line to the changing needs of the signal receiver. It can be used to delay audio/video signals, control frequency and signal edges, plus much more. Through its programmable delay line and analog amplifier, various signal characteristics can be adjusted to suit various systems.

The programmable delay line is also used to match different signal type characteristics for a specific system. This includes adjusting the gain, signal amplitude, signal to noise ratio, and other key performance factors. It also enables signal correction such as signal edge timing, jitter rejection, and synchronization.

The external clock is used to control the delay intervals. It can be set to accurately match the output of the system or subsystem and provide correct delays. With the DS1100LU-300/T&R you can select and adjust the delay intervals to match the system or subsystem performance and control the signal processing and ultimately obtain the best results.

In summary, the DS1100LU-300/T&R is a versatile delay line for clock/timing applications in many different systems. Its programmable delay line and analog amplifier provide adjustable delay settings from 1 ns to 31ms with accuracy to fractions of nanoseconds. Through its adjustable delays, signal characteristics can be finely tuned to match system performance and ensure the best results.

The specific data is subject to PDF, and the above content is for reference