DS1135LZ-15+

Series:	--
Packaging:	Tube
Part Status:	Active
Function:	Multiple, NonProgrammable
Delay to 1st Tap:	15ns
Available Total Delays:	15ns
Number of Independent Delays:	3
Voltage - Supply:	2.7 V ~ 3.6 V
Operating Temperature:	-40°C ~ 85°C
Mounting Type:	Surface Mount
Package / Case:	8-SOIC (0.154", 3.90mm Width)
Supplier Device Package:	8-SOIC
Base Part Number:	DS1135L

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DS1135LZ-15+ is a type of clock or timing delay line. As the name implies, it works by introducing a delay in the transmission of a signal. This signal delay, or delay line as it is called, can be used for a variety of applications.
The DS1135LZ-15+ is an oscillator-based delay line, which means that it uses oscillators to transmit the signal. This allows for the introduction of a variable delay which can be adjusted to the exact requirements of the application for which it is being used. One of the most common applications for the DS1135LZ-15+ is in pulse transmitting systems, where the variable delay allows for precise synchronization of signals, allowing them to be sent with the exact timing required.
The DS1135LZ-15+ can also be used for signal conditioning. Through the addition of a variable delay, the signal characteristics can be altered to better suit the receiving equipment or system. By adjusting the delay line, the signal attenuation, offset, and amplitude can be altered to ensure that the signal is as clean as possible when it reaches its destination.
The DS1135LZ-15+ also has several other applications in timing and clock applications. It can be used to provide clocking signals for digital devices and systems, as well as providing a source of clock cycles which can be used to synchronize multiple devices. In addition, it can be used as a timing base for a variety of control systems, data acquisition systems and microprocessors.
As for how the DS1135LZ-15+ works, it is based on an oscillator-based delay line. An oscillator\'s basic principle is that of producing a periodic signal which remains in phase with itself after being transmitted through a system. In the case of the DS1135LZ-15+, this periodic signal is created through the use of quartz crystals which are tuned to the exact frequency of the desired delay line.
When the oscillator is powered up, it will begin to oscillate with the frequency of the quartz crystal. This oscillation is then passed through the delay line and emerges at the other end with a delay of a certain number of clock cycles. The observed delay can be adjusted by changing the frequency of the oscillator, either manually or electronically. This allows for the adjustment of the delay line to produce the exact delay required for the application.
In conclusion, the DS1135LZ-15+ is a type of clock or timing delay line which is used for a variety of applications. It is based on an oscillator-based delay line, which means that the delay can be adjusted by changing the frequency of the oscillator. This makes it ideal for pulse transmitting systems, signal conditioning and clocking applications, as well as being useful in a variety of control and data acquisition systems.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description